メインコンテンツにスキップ

はじめに

Use this guide shows to replace the slim case of your FairPhone 2.

If you still have the bumper made in one piece you maybe want to use this guide.

  1. Pick a corner of your slim case and get between the two parts with your thumb's fingernails. Pull up the back part of the slim case to separate the small snap fit connections. Remove the back part of the slim case.
    • Pick a corner of your slim case and get between the two parts with your thumb's fingernails.

    • Pull up the back part of the slim case to separate the small snap fit connections.

    • Remove the back part of the slim case.

  2. Get in between the front part of the slim case and the phone's body with your thumb nail. Separate the snap fit connectors on the front part by pulling it to the side and pushing against the display. Separate the snap fit connectors on the front part by pulling it to the side and pushing against the display.
    • Get in between the front part of the slim case and the phone's body with your thumb nail.

    • Separate the snap fit connectors on the front part by pulling it to the side and pushing against the display.

  3. Remove the front part of the slim case.
    • Remove the front part of the slim case.

終わりに

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

Tobias Isakeit

メンバー登録日: 2014年03月31日

85,960 ポイント

162のガイドは作成済み

チーム

iFixit iFixit人のメンバー

Community

137 メンバー

16,052のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 12

今までの合計 1,047