メインコンテンツにスキップ

Esteban Crystal Heart Strings Replacement

必要な工具と部品

  1. Esteban Crystal Heart Strings Replacement, Removing the damaged strings from the head: 手順 1、 3の画像 1 Esteban Crystal Heart Strings Replacement, Removing the damaged strings from the head: 手順 1、 3の画像 2 Esteban Crystal Heart Strings Replacement, Removing the damaged strings from the head: 手順 1、 3の画像 3
    • On the head of the guitar, unroll the string from its tuning peg.

    • Once the string is unrolled, remove the string by sliding it out of the small hole in its tuning peg.

  2. Esteban Crystal Heart Strings Replacement, Removing the string from the bridge: 手順 2、 3の画像 1 Esteban Crystal Heart Strings Replacement, Removing the string from the bridge: 手順 2、 3の画像 2 Esteban Crystal Heart Strings Replacement, Removing the string from the bridge: 手順 2、 3の画像 3
    • Remove the peg from the bridge but pulling it out of its hole.

    • Pull the string out of the hole.

  3. Esteban Crystal Heart Strings Replacement, Inserting the new string on the bridge.: 手順 3、 3の画像 1 Esteban Crystal Heart Strings Replacement, Inserting the new string on the bridge.: 手順 3、 3の画像 2 Esteban Crystal Heart Strings Replacement, Inserting the new string on the bridge.: 手順 3、 3の画像 3
    • Insert the end of the string with the small hole in it in the opened peg in the bridge.

    • Start to insert the peg in the hole with the string under it.

    • Push the peg down tightly to make sure that the string will not pop out when enough resistance is put in it.

  4. Esteban Crystal Heart Strings Replacement, Inserting the new string in the head: 手順 4、 3の画像 1 Esteban Crystal Heart Strings Replacement, Inserting the new string in the head: 手順 4、 3の画像 2 Esteban Crystal Heart Strings Replacement, Inserting the new string in the head: 手順 4、 3の画像 3
    • Pull the string and line it around the tuning peg, underneath the hole. Make sure that the resistance is pretty strong.

    • Wrap the remaining strings on the tuning peg about 5 or 6 times.

    • Slide the remaining end of the string through the hole and hold it in place.

  5. Esteban Crystal Heart Strings Replacement, Tightening the string: 手順 5、 3の画像 1 Esteban Crystal Heart Strings Replacement, Tightening the string: 手順 5、 3の画像 2 Esteban Crystal Heart Strings Replacement, Tightening the string: 手順 5、 3の画像 3
    • Twist the tuning peg to the right to tighten it.

    • Make sure that the string has enough resistance that when it is strummed, there is a tone.

  6. Esteban Crystal Heart Strings Replacement, Tuning the guitar in its correct sound: 手順 6、 3の画像 1 Esteban Crystal Heart Strings Replacement, Tuning the guitar in its correct sound: 手順 6、 3の画像 2 Esteban Crystal Heart Strings Replacement, Tuning the guitar in its correct sound: 手順 6、 3の画像 3
    • You can use a tuner by just playing each string in front of it and then just turn the fasteners until the tuner shows that the sound matches its appropriate sound.

    • Another way is by ear, press down on the fifth fret and the preceding string in which you are trying to tune. For example, if you are tuning the high E string, press down the B string, 5th fret.

    • Strumming the B stringwhile pressing down on the 5th fret should make the sound of open E string.

    • Match the sounds of both strings and this will tune the high E string.

終わりに

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

作成者

1人の作成者と共同作成されました。

Andrew Jayson Caberto

メンバー登録日: 10/11/14

143 ポイント

1ガイドが承認済み

チーム

USF Tampa, Team 1-5, Donnelly Fall 2014 USF Tampa, Team 1-5, Donnelly Fall 2014人のメンバー

USFT-DONNELLY-F14S1G5

1 メンバー

1のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 5

今までの合計 1,079