この修理ガイドは変更されています。最新の未承認バージョンに切り替えます。

Epiphone Les Paul Guitar String Replacement

作成者： Matthew Thomas (そして 3 人のその他投稿者)

コメント: 1
お気に入り: 2
完了: 8

Epiphone Les Paul Guitar String Replacement

難易度

普通

手順

所要時間

8 - 15 分

はじめに

Whether you broke a string or want a freshly bright sound for your guitar, this guide will teach you how to replace a string on your Epiphone Les Paul electric guitar. I will be using D'Addario Super Light Gauge strings.

ツール

これらのツールを購入する

Flush Wire Cutters

$4.99

購入する

パーツ

パーツは指定されていません。

手順1 Guitar String

Loosen the first sting you would like to replace by turning the corresponding knob counter-clockwise.

Loosen the first sting you would like to replace by turning the corresponding knob counter-clockwise.
Do NOT loosen/remove all strings at once! The lack of tension will cause the neck of the guitar to bend, and the guitar will have trouble staying in tune.

翻訳

手順2

Pull string away from the rest of the strings and snip it with the wire cutters.

Pull string away from the rest of the strings and snip it with the wire cutters.
String may go flying and will be sharp. Be careful.

翻訳

手順3

Remove the cut string from the bridge of the guitar and its corresponding spoke.

Remove the cut string from the bridge of the guitar and its corresponding spoke.

翻訳

手順4

Lead new string through bridge and then spoke. Leave plenty of slack in the string.

Strings will be color coded by the bead on the end of it, and the pack of strings will tell you which string goes where.

Lead new string through bridge and then spoke. Leave plenty of slack in the string.
Strings will be color coded by the bead on the end of it, and the pack of strings will tell you which string goes where.

翻訳

手順5

Use your right hand to hold the slack near the bridge, and use your left hand to tightly pull the string through the spoke while turning the knob with the fingers of your left hand.

This may feel uncomfortable, and will also take the longest out of all the steps.

Use your right hand to hold the slack near the bridge, and use your left hand to tightly pull the string through the spoke while turning the knob with the fingers of your left hand.
This may feel uncomfortable, and will also take the longest out of all the steps.

翻訳

手順6

Once the string starts getting tight and your right hand is no longer needed to hold slack, start tuning the string to the note you want it at.

Once the string starts getting tight and your right hand is no longer needed to hold slack, start tuning the string to the note you want it at.
You can use a tuner or your ear. This site can prove to be helpful: How to Tune a Guitar