はじめに

Whether you broke a string or want a freshly bright sound for your guitar, this guide will teach you how to replace a string on your Epiphone Les Paul electric guitar. I will be using D'Addario Super Light Gauge strings.

パーツ

パーツは必要ありません。

  1. Loosen the first sting you would like to replace by turning the corresponding knob counter-clockwise.
    • Loosen the first sting you would like to replace by turning the corresponding knob counter-clockwise.

    • Do NOT loosen/remove all strings at once! The lack of tension will cause the neck of the guitar to bend, and the guitar will have trouble staying in tune.

  2. Pull string away from the rest of the strings and snip it with the wire cutters.
    • Pull string away from the rest of the strings and snip it with the wire cutters.

    • String may go flying and will be sharp. Be careful.

  3. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    当社のショップを閲覧する
  4. Remove the cut string from the bridge of the guitar and its corresponding spoke.
    • Remove the cut string from the bridge of the guitar and its corresponding spoke.

  5. Lead new string through bridge and then spoke. Leave plenty of slack in the string. Strings will be color coded by the bead on the end of it, and the pack of strings will tell you which string goes where.
    • Lead new string through bridge and then spoke. Leave plenty of slack in the string.

    • Strings will be color coded by the bead on the end of it, and the pack of strings will tell you which string goes where.

  6. Use your right hand to hold the slack near the bridge, and use your left hand to tightly pull the string through the spoke while turning the knob with the fingers of your left hand. This may feel uncomfortable, and will also take the longest out of all the steps.
    • Use your right hand to hold the slack near the bridge, and use your left hand to tightly pull the string through the spoke while turning the knob with the fingers of your left hand.

    • This may feel uncomfortable, and will also take the longest out of all the steps.

  7. Once the string starts getting tight and your right hand is no longer needed to hold slack, start tuning the string to the note you want it at.
    • Once the string starts getting tight and your right hand is no longer needed to hold slack, start tuning the string to the note you want it at.

    • You can use a tuner or your ear. This site can prove to be helpful: How to Tune a Guitar

まとめ

Have fun playing with your new bright-sounding guitar.

7 の人々がこのガイドを完成させました。

Matthew Thomas

メンバー登録日: 2015年02月24日

281 ポイント

1ガイドが承認済み

チーム

Cal Poly, Team 24-3, Green Winter 2015 Cal Poly, Team 24-3, Green Winter 2015人のメンバー

CPSU-GREEN-W15S24G3

5 メンバー

3のガイドは作成済み

コメント1件

Thank you very much. First time changing the strings to a guitar, unfortunately I'm a moron and broke the D String :\

Luigi - 返信

統計データを表示:

過去 24時間: 8

過去 7 日: 50

過去 30 日: 197

今までの合計 6,354