修理を始めるには コミュニティ ストア

Epiphone ES-335 PRO Pickguard Replacement

はじめに

Follow these steps to replace the pickguard on your Epiphone ES-335 PRO electric guitar. This may be necessary because the pickguard is chipped or broken due to an accident. You may also want to change the pickguard to change the design of the guitar.

必要な工具と部品

  1. Epiphone ES-335 PRO Pickguard Replacement, Pickguard: 手順 1、 1の画像 1

    • Locate the screw closest to the neck of the guitar.

    • Use a phillips head #2 screwdriver to completely unscrew the 1.0 mm length screw.

    • Be sure to keep any screws together as you will use them again, unless the replacement pickguard has its own screws.

    編集

  3. Epiphone ES-335 PRO Pickguard Replacement: 手順 2、 2の画像 1 Epiphone ES-335 PRO Pickguard Replacement: 手順 2、 2の画像 2

    • Using a phillips head #2 screwdriver, completely unscrew the 1.0 mm length screw.

    • Gently lift the pickguard off the body of the guitar.

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

1人の作成者と共同作成されました。

Michaih Ley Bayani

メンバー登録日: 03/28/18

515 ポイント

4のガイドは作成済み

バッジ: 8

+5 個以上のバッジ

チーム

University of Memphis, Team S1-G4, Kim Spring 2018 University of Memphis, Team S1-G4, Kim Spring 2018人のメンバー

UM-KIM-S18S1G4

4 メンバー

7のガイドは作成済み

コメント 1 件

very nice and simple demo, but where would you get a new pickguard, as Epiphone will not

supply them and other aftermarket guards will not fit.

peterattard1 - 返信

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 16

過去 30 日: 62

今までの合計 4,499