Enagic Water Filter SD501 Platinum Filter Replacement

はじめに

Learn how to replace the filter of your Enagic Water filter SD501 Platinum to maintain its function with this filter replacement guide.

It is important to do this replacement since we would want to keep your water source as clean as possible. The filter should be always replace in 6-9 months. You can always make sure by marking the dates down.

Make sure you have prepared a brand new filter for steps 7 and 8 to replace the old one.

Before beginning, you might want to clean up the surroundings. You don’t want anything getting in your water filter machine.

必要な工具と部品

手順1 Filter

Enagic Water Filter SD501 Platinum Filter Replacement, Filter: 手順 1、 1の画像 1

Turn off and unplug the machine before cleaning it.
Clean the machine with a damp cloth or paper towel.
Make sure nothing dirty will get in the machine during the process.

編集

手順2

Enagic Water Filter SD501 Platinum Filter Replacement: 手順 2、 3の画像 3

Open the filter door by pushing the "Push" button.

編集

手順3

Enagic Water Filter SD501 Platinum Filter Replacement: 手順 3、 3の画像 3

Turn the ring at the bottom of the filter to the left until you hear a "click".

編集

手順4

Remove the ring for now.

編集

手順5

Lift up the old filter and discard or recycle appropriately.
Some water might be dripping out from the bottom of it. Have a towel ready to clean it up.

編集

手順6

Enagic Water Filter SD501 Platinum Filter Replacement: 手順 6、 3の画像 3

Remove the two black rubber rings.
They are NOT components of the machine. The new filter you have prepared should come with new ones.

編集

手順7

Enagic Water Filter SD501 Platinum Filter Replacement: 手順 7、 3の画像 3

Put your new filter in it.
Make sure that the two holes match the two popped-out parts from the filter.
The one that is bigger should be on the middle and the smaller one should be on the side.
This filter should be the new one that you have prepared and NOT the one that is removed from Step 5.