メインコンテンツにスキップ

Enabot EBO SE Wheels Replacement

必要な工具と部品

  1. Enabot EBO SE Wheels Replacement, Wheel Assembly: 手順 1、 1の画像 1
    • Gently turn the robot upside down.

    • Place the robot on a stable surface to prevent it from rolling or falling.

  2. Enabot EBO SE Wheels Replacement: 手順 2、 3の画像 1 Enabot EBO SE Wheels Replacement: 手順 2、 3の画像 2 Enabot EBO SE Wheels Replacement: 手順 2、 3の画像 3
    • Use a flathead 2.5 mm screwdriver to remove the 5.7 mm screw from the wheels.

    • A tool should have been provided in the box for this purpose.

  3. Enabot EBO SE Wheels Replacement: 手順 3、 2の画像 1 Enabot EBO SE Wheels Replacement: 手順 3、 2の画像 2
    • Pull the wheel assembly towards you so it comes straight off without resistance.

    • If there is resistance, make sure to apply gentle force when pulling as it can get damaged with too much force.

  4. Enabot EBO SE Wheels Replacement, Wheels: 手順 4、 2の画像 1 Enabot EBO SE Wheels Replacement, Wheels: 手順 4、 2の画像 2
    • Pull on the tire tread perpendicularly to the wheels to remove the tread.

    • The wheel should naturally come off with it for replacement.

  5. Enabot EBO SE Wheels Replacement: 手順 5、 2の画像 1 Enabot EBO SE Wheels Replacement: 手順 5、 2の画像 2
    • Repeat previous step with the wheels on the other side.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

4人の作成者と共同で作成されました。

Kevin H.

メンバー登録日: 02/15/24

656 ポイント

5のガイドは作成済み

チーム

University of Memphis, Team 4-5, Sneed Spring 2024 University of Memphis, Team 4-5, Sneed Spring 2024人のメンバー

UM-SNEED-S24S4G5

4 メンバー

6のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 11

今までの合計 99