はじめに

A guide on how to solder --> How To Solder and Desolder Connections

パーツ

パーツは必要ありません。

  1. Use a spudger to pry open the case of your device to reveal the inside. Use a spudger to pry open the case of your device to reveal the inside.
    • Use a spudger to pry open the case of your device to reveal the inside.

  2. Disconnect the LCD cable from the motherboard by pressing together the two sides of the clamp to separate the device into two. Disconnect the LCD cable from the motherboard by pressing together the two sides of the clamp to separate the device into two.
    • Disconnect the LCD cable from the motherboard by pressing together the two sides of the clamp to separate the device into two.

  3. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    当社のショップを閲覧する
  4. Remove the screws holding down the motherboard. Remove the plastic power and volume buttons. remove the two side grips of the device. You can now remove the motherboard, speaker, and battery as one from the device. Remove the screws holding down the motherboard. Remove the plastic power and volume buttons. remove the two side grips of the device. You can now remove the motherboard, speaker, and battery as one from the device.
    • Remove the screws holding down the motherboard. Remove the plastic power and volume buttons. remove the two side grips of the device. You can now remove the motherboard, speaker, and battery as one from the device.

  5. Unsolder the gray, black, and red wires from the motherboard to release the battery.
    • Unsolder the gray, black, and red wires from the motherboard to release the battery.

まとめ

To reassemble your device, follow these instructions in reverse order.

Timothy

メンバー登録日: 2015年01月21日

505 ポイント

5のガイドは作成済み

チーム

USF Tampa, Team 9-2, Brown Winter 2015 USF Tampa, Team 9-2, Brown Winter 2015人のメンバー

USFT-BROWN-W15S9G2

5 メンバー

10のガイドは作成済み

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 1

今までの合計 104