メインコンテンツにスキップ
  1. この手順は未翻訳です。 翻訳を手伝う。

    Turn off the device before starting To prevent damage, open the device on the side without the buttons. Insert the hooked end of the plastic opening tool in the gap between the screen and the back panel on the edge of the device.
    • Turn off the device before starting

    • To prevent damage, open the device on the side without the buttons.

    • Insert the hooked end of the plastic opening tool in the gap between the screen and the back panel on the edge of the device.

    • Slide the plastic opening tool down the long side of the device.

    • Insert tool again and slide it down the long slide of the case a second time.

  2. この手順は未翻訳です。 翻訳を手伝う。

    Pull the back panel away from the screen.
    • Pull the back panel away from the screen.

  3. この手順は未翻訳です。 翻訳を手伝う。

    Remove the wires from the motherboard using a soldering iron tool. Here is a link on How To Solder and Desolder Connections. Remove the wires from the motherboard using a soldering iron tool. Here is a link on How To Solder and Desolder Connections.
  4. この手順は未翻訳です。 翻訳を手伝う。

    After the connections are desoldered, remove the speaker by prying it up using a plastic opening tool. There is glue on the back of the speaker. Some more force may be required. There is glue on the back of the speaker. Some more force may be required.
    • After the connections are desoldered, remove the speaker by prying it up using a plastic opening tool.

    • There is glue on the back of the speaker. Some more force may be required.

ゴール

Amanda Davis

メンバー登録日: 2018年07月11日

581 ポイント

5のガイドは作成済み

チーム

UW Tacoma, Team S1-G5, Cardinal Summer 2018 UW Tacoma, Team S1-G5, Cardinal Summer 2018人のメンバー

UWT-CARDINAL-SU18S1G5

4 メンバー

12のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 129