メインコンテンツにスキップ

Eightarc Fusion Logic Board Replacement

必要な工具と部品

  1. Eightarc Fusion Logic Board Replacement, Logic Board: 手順 1、 2の画像 1 Eightarc Fusion Logic Board Replacement, Logic Board: 手順 1、 2の画像 2
    • Because of the protruding joystick on the top of the controller, make sure to work on a soft surface or prop the controller up to avoid stress on the joystick.

    • Place the controller face down (buttons and joystick down).

    • Use a Phillips Head #1 screwdriver to remove the eight 9.65mm screws located on the felt and metal backplate.

    • Do not confuse the four screws in the rubber feet with the eight screws in the felt. The screws in the feet do not need to be removed.

  2. Eightarc Fusion Logic Board Replacement: 手順 2、 1の画像 1
    • Open the door for the cord storage compartment on the right side of the device.

    • Reach under the panel and push upwards on the back panel. Lift it up and remove it from the device.

  3. Eightarc Fusion Logic Board Replacement: 手順 3、 3の画像 1 Eightarc Fusion Logic Board Replacement: 手順 3、 3の画像 2 Eightarc Fusion Logic Board Replacement: 手順 3、 3の画像 3
    • Make sure not to flex the logic board when removing ribbon cables.

    • Individually remove the seven cable connectors plugged into the logic board by grasping each white plug and gently pulling upwards.

  4. Eightarc Fusion Logic Board Replacement: 手順 4、 1の画像 1
    • Use a Phillips Head #1 screwdriver to remove the two 7.15mm washer head screws from logic board.

  5. Eightarc Fusion Logic Board Replacement: 手順 5、 1の画像 1
    • Gently lift off logic board up to remove from the device.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

1人の作成者と共同作成されました。

Chandler Stalford

メンバー登録日: 02/04/15

101 ポイント

1ガイドが承認済み

チーム

Cal Poly, Team 17-35, Amido Winter 2015 Cal Poly, Team 17-35, Amido Winter 2015人のメンバー

CPSU-AMIDO-W15S17G35

4 メンバー

5のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 4

今までの合計 405