修理を始めるには コミュニティ ストア

Dyson Supersonic HD03 Hairdryer Filter Replacement

はじめに

A hairdryer is commonly used in our daily life, sometimes users forgot how important cleaning your device is. This guide is mainly focused on replacing and cleaning the Dyson Supersonic HD03 hairdryer filter. Whenever users encounter operation failure or weird noises, there are high chances that the hairdryer’s filter is blocked with dust or hair. Cleaning your hairdryer filter will help you avoid operation failure and increase your device life span. This guide will show you how to clean and replace your filter.

For further detailed information, you can visit Dyson Official.

必要な工具と部品

  1. Dyson Supersonic HD03 Hairdryer Filter Replacement, Filter: 手順 1、 2の画像 1 Dyson Supersonic HD03 Hairdryer Filter Replacement, Filter: 手順 1、 2の画像 2

    • Unplug the hairdryer to avoid further hazard.

    編集

  2. Dyson Supersonic HD03 Hairdryer Filter Replacement: 手順 2、 2の画像 1 Dyson Supersonic HD03 Hairdryer Filter Replacement: 手順 2、 2の画像 2

    • Remove the dirty filter cage by twisting the filter towards the left.

    • The filter cage will be unlocked when the red dot matches the white thin circle.

    • Do not run your hairdryer without a filter cage.

    編集

  4. Dyson Supersonic HD03 Hairdryer Filter Replacement: 手順 3、 1の画像 1

    • Soak the filter cage in dish soap and warm water for at least 30 minutes.

    • You can leave the filter in for multiple hours or overnight if it's especially dirty.

    編集

    • Use the supplied filter cleaning brush or any other cleaning tool to vigorously scrub the soaked filter cage.

    • Be sure to remove all blockages.

    編集

  6. Dyson Supersonic HD03 Hairdryer Filter Replacement: 手順 5、 1の画像 1

    • Rinse and dry your filter cage.

    • Check that the filter cage is clean by holding it up to the light - you should be able to see light through it. If you can't, repeat the previous step.

    編集

  7. Dyson Supersonic HD03 Hairdryer Filter Replacement: 手順 6、 2の画像 1 Dyson Supersonic HD03 Hairdryer Filter Replacement: 手順 6、 2の画像 2

    • Insert the filter back into the filter cage and install the filter cage back onto the device.

    • The filter cage will be locked when the red dot matches the white filled circle.

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

2人の作成者と共同で作成されました。

Huan-Che Hsu

メンバー登録日: 09/18/21

192 ポイント

1ガイドが承認済み

バッジ: 4

+1 以上のバッジ

チーム

York University, Team F-14, Woodhouse Fall 2021 York University, Team F-14, Woodhouse Fall 2021人のメンバー

YORK-WOODHOUSE-F21SFG14

1 メンバー

1のガイドは作成済み

コメント 1 件

My Dyson hair dryer has quitting every 30 seconds - apparently overheating. It was very easy to remove the filter cage and wipe the filter clean. Problem solved!

Jimjar - 返信

コメントを追加

統計データ:

過去 24時間: 1

過去 7 日: 10

過去 30 日: 73

今までの合計 4,045