メインコンテンツにスキップ

はじめに

This guide will show you how to open and replace the bin of your Dyson DC58.

  1. Make sure your vacuum is unplugged.
    • Make sure your vacuum is unplugged.

    • Avoid pressing the red trigger on the vacuum handle; this will power on the vacuum.

  2. Locate the red lever parallel to the red trigger and on the side of the clear bin.
    • Locate the red lever parallel to the red trigger and on the side of the clear bin.

  3. Push the red lever downward to open the clear bin. You may need to do this over a trash bin if there is debris in the clear bin.
    • Push the red lever downward to open the clear bin. You may need to do this over a trash bin if there is debris in the clear bin.

  4. Push the red lever downward again while pulling the clear bin away from the main body of the Dyson vacuum. Push the red lever downward again while pulling the clear bin away from the main body of the Dyson vacuum.
    • Push the red lever downward again while pulling the clear bin away from the main body of the Dyson vacuum.

終わりに

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

Ian Sloan

メンバー登録日: 2015年09月17日

146 ポイント

1ガイドが承認済み

チーム

CSU Fullerton, Team 2-4, Bruce Fall 2015 CSU Fullerton, Team 2-4, Bruce Fall 2015人のメンバー

CSUF-BRUCE-F15S2G4

4 メンバー

12のガイドは作成済み

2 件のコメント

The bin is stuck and won’t come off, although I have followed the directions above.

Marcy Altimano - 返信

I think the reassembly instructions should be numbered “Step 5” and printed right below Step 4. They aren’t that easy to see.

Mary Miraglia - 返信

コメントを追加

統計データを表示:

過去 24時間: 2

過去 7 日: 40

過去 30 日: 179

今までの合計 5,011