メインコンテンツにスキップ

Dyson DC56 Motor Replacement

必要な工具と部品

  1. Dyson DC56 Motor Replacement, Battery: 手順 1、 1の画像 1
    • Make sure the vacuum is unplugged from charger.

    • Warning: Avoid pressing red trigger because the vacuum will turn on the device and begin suction.

  2. Dyson DC56 Motor Replacement: 手順 2、 1の画像 1
    • Locate the purple button at the top of the device.

  3. Dyson DC56 Motor Replacement: 手順 3、 1の画像 1
    • Separate the device with the purple button.

  4. Dyson DC56 Motor Replacement: 手順 4、 1の画像 1
    • Take out the filter.

  5. Dyson DC56 Motor Replacement: 手順 5、 1の画像 1
    • Locate and remove the 10mm Phillips head screw using a Phillips #1 screw driver.

  6. Dyson DC56 Motor Replacement, Battery screw 2: 手順 6、 1の画像 1
    • Locate and remove #000 25mm phillips screw on the reverse side of the vacuum

  7. Dyson DC56 Motor Replacement: 手順 7、 1の画像 1
    • Pull the battery pack down and away from the main body and remove it from the device.

  8. Dyson DC56 Motor Replacement, Motor: 手順 8、 1の画像 1
    • Take out the 10mm screw using a Phillips #1 screwdriver.

  9. Dyson DC56 Motor Replacement: 手順 9、 1の画像 1
    • Use a spudger to separate the back plate covering the motor.

    • Be careful when trying to remove the motor with a metal spudger. Be sure your battery is removed before trying to fully remove the motor.

  10. Dyson DC56 Motor Replacement: 手順 10、 1の画像 1
    • Use a flat spudger to loosen and remove the motor out of the vacuum.

終わりに

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

作成者

4人の作成者と共同で作成されました。

John Czerkawski

メンバー登録日: 10/02/17

427 ポイント

4のガイドは作成済み

チーム

USF Tampa, Team S10-G1, Thompson Fall 2017 USF Tampa, Team S10-G1, Thompson Fall 2017人のメンバー

USFT-THOMPSON-F17S10G1

4 メンバー

11のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 3

過去 30 日: 9

今までの合計 2,365