メインコンテンツにスキップ

はじめに

This guide is suppose to help you open up the device. Do not do this unless certain that you need to check something.

パーツ

パーツは指定されていません。

  1. Remove battery. Remove the label cassette.
    • Remove battery.

    • Remove the label cassette.

  2. Remove the 6 screws in the indicated places. These particular screws are 2mm x 8mm Phillips #0 head Remove the 6 screws in the indicated places. These particular screws are 2mm x 8mm Phillips #0 head
    • Remove the 6 screws in the indicated places. These particular screws are 2mm x 8mm Phillips #0 head

  3. Use the spudger to take apart the device by insterting it as shown in the picture and twisting it. This should be done all around the device to ensure the two parts split correctly. The keys/buttons highlighted in the second picture fall out easily so be careful. Keep device faced down in order to keep them from falling.
    • Use the spudger to take apart the device by insterting it as shown in the picture and twisting it. This should be done all around the device to ensure the two parts split correctly.

    • The keys/buttons highlighted in the second picture fall out easily so be careful. Keep device faced down in order to keep them from falling.

終わりに

To reassemble your device, follow these instructions in reverse order.

Steven Nguyen

メンバー登録日: 2016年02月08日

407 ポイント

3のガイドは作成済み

チーム

USF Tampa, Team 6-5, Eyestone Spring 2016 USF Tampa, Team 6-5, Eyestone Spring 2016人のメンバー

USFT-EYESTONE-S16S6G5

3 メンバー

3のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 4

今までの合計 250