メインコンテンツにスキップ

この修理ガイドは変更されています。最新の未承認バージョンに切り替えます。

Durofix RV332 Battery LED Replacement

必要な工具と部品

  1. Durofix RV332 Battery LED Replacement, Battery LED: 手順 1、 1の画像 1
    • Remove the six 13 mm case screws with a #0 Phillips screwdriver.

  2. Durofix RV332 Battery LED Replacement: 手順 2、 2の画像 1 Durofix RV332 Battery LED Replacement: 手順 2、 2の画像 2
    • Using a plastic opening tool, separate the casing halves to expose the contents of the cordless screwdriver.

  3. Durofix RV332 Battery LED Replacement: 手順 3、 3の画像 1 Durofix RV332 Battery LED Replacement: 手順 3、 3の画像 2 Durofix RV332 Battery LED Replacement: 手順 3、 3の画像 3
    • Remove printed circuit board, LED, battery, and motor assembly from the screwdriver casing.

    • Use a soldering iron to melt the solder from the LED's two pins on the printed circuit board.

    • Remove the LED from the circuit board while the solder is still melted.

  4. Durofix RV332 Battery LED Replacement: 手順 4、 2の画像 1 Durofix RV332 Battery LED Replacement: 手順 4、 2の画像 2
    • Place the positive leg of the new LED through the positive hole in the printed circuit board and solder it into place.

    • Place the negative leg of the LED through the negative hold in the printed circuit board and solder it into place.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

5人の作成者と共同で作成されました。

Tyler Vincent

メンバー登録日: 02/24/14

479 ポイント

4のガイドは作成済み

チーム

Michigan Tech, Team 5-5, Lauer Spring 2014 Michigan Tech, Team 5-5, Lauer Spring 2014人のメンバー

MTU-LAUER-S14S5G5

3 メンバー

5のガイドは作成済み

コメント 1 件

Hello, I would ask the author about the type and model number of the electronic element marked as Q1 on the PCB (transistor or thyristor) on the third picture in Step 3 of this article, because mine is burnt out, and on this picture can't be read anything.

Greetings,

Plam

Пламен Петракиев - 返信

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 2

今までの合計 1,088