メインコンテンツにスキップ
  1. Unscrew the four 6.5mm screws, using a Phillips-Head screwdriver. Pry the two halves of the shell apart using a plastic opening tool. Be careful, as there will be a ribbon connecting the inner workings of the controller. It will not separate into two parts just by pulling apart the shell.
    • Unscrew the four 6.5mm screws, using a Phillips-Head screwdriver.

    • Pry the two halves of the shell apart using a plastic opening tool.

    • Be careful, as there will be a ribbon connecting the inner workings of the controller. It will not separate into two parts just by pulling apart the shell.

  2. Pull the ribbon cable out of the motherboard port to fully separate the two halves, using a pair of tweezers. Pull the ribbon cable out of the motherboard port to fully separate the two halves, using a pair of tweezers. Pull the ribbon cable out of the motherboard port to fully separate the two halves, using a pair of tweezers.
    • Pull the ribbon cable out of the motherboard port to fully separate the two halves, using a pair of tweezers.

  3. Unplug the black and red wires from the power port located on the motherboard. Remove the old battery from the controller. Remove the old battery from the controller.
    • Unplug the black and red wires from the power port located on the motherboard.

    • Remove the old battery from the controller.

  4. iPhoneのバッテリーキット

    Only $29.99

    Buy Now

    iPhoneのバッテリーキット

    Only $29.99

    Buy Now
  5. Remove the 6.43mm screw connecting the motherboard to the inner workings of the controller, using a Phillips-Head screwdriver. Remove the 6.43mm screw connecting the motherboard to the inner workings of the controller, using a Phillips-Head screwdriver.
    • Remove the 6.43mm screw connecting the motherboard to the inner workings of the controller, using a Phillips-Head screwdriver.

  6. Unhook the battery case from the motherboard, and pull it off. Unhook the battery case from the motherboard, and pull it off. Unhook the battery case from the motherboard, and pull it off.
    • Unhook the battery case from the motherboard, and pull it off.

  7. Pull out the second ribbon cable to separate the inner workings from the top of the outer shell. Pull out the second ribbon cable to separate the inner workings from the top of the outer shell. Pull out the second ribbon cable to separate the inner workings from the top of the outer shell.
    • Pull out the second ribbon cable to separate the inner workings from the top of the outer shell.

  8. Remove the rubber pads that secure the buttons in place for the arrow buttons, shape buttons, and Playstation Home button. Do not turn the front shell cover upside down after completing this step, because some of the buttons may fall out. Do not turn the front shell cover upside down after completing this step, because some of the buttons may fall out.
    • Remove the rubber pads that secure the buttons in place for the arrow buttons, shape buttons, and Playstation Home button.

    • Do not turn the front shell cover upside down after completing this step, because some of the buttons may fall out.

  9. Remove the old buttons, and replace them with new ones using a pair of tweezers. Remove the old buttons, and replace them with new ones using a pair of tweezers.
    • Remove the old buttons, and replace them with new ones using a pair of tweezers.

まとめ

To reassemble your device, follow these instructions in reverse order.

16 の人々がこのガイドを完成させました。

Michelle Joseph

メンバー登録日: 2017年10月09日

849 ポイント

3のガイドは作成済み

チーム

USF Tampa, Team S1-G5, Leahy Fall 2017 USF Tampa, Team S1-G5, Leahy Fall 2017人のメンバー

USFT-LEAHY-F17S1G5

3 メンバー

5のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 8

過去 7 日: 58

過去 30 日: 265

今までの合計 5,064