はじめに

Use this guide to access the vibration motors on DualShock 3 controllers. The two vibration motors are slightly different and thus are non-interchangeable.

  1. Remove the five 7.2 mm Phillips screws securing the rear cover to the controller.
    • Remove the five 7.2 mm Phillips screws securing the rear cover to the controller.

  2. Press on the rear cover between the analog sticks and slightly lift the lower edge of it away from the rest of the controller.
    • Press on the rear cover between the analog sticks and slightly lift the lower edge of it away from the rest of the controller.

  3. Push the rear cover slightly toward the top edge of the controller to clear the front edge of the #2 triggers. Pull the rear cover away from the rest of the controller, being careful not to pop off the #2 triggers.
    • Push the rear cover slightly toward the top edge of the controller to clear the front edge of the #2 triggers.

    • Pull the rear cover away from the rest of the controller, being careful not to pop off the #2 triggers.

    • If you happen to accidentally pop off the trigger buttons, we have a trigger button guide to reattach them.

  4. Free shipping on all orders over $100.00 or containing a Pro Tech Toolkit!

    当社のショップを閲覧する
  5. Lift the battery off the motherboard for enough clearance to access the battery connector.
    • Lift the battery off the motherboard for enough clearance to access the battery connector.

  6. Carefully pull the battery connector away from its socket on the motherboard.
    • Carefully pull the battery connector away from its socket on the motherboard.

    • It may be helpful to use a pair of tweezers or pliers to grab the battery connector when you disconnect it for the first time. Only pull on the connector. Do not try to remove by pulling on the red and black wires.

  7. Pull the vibration motor out of its plastic frame, being careful not to strain the wires connecting it to the motherboard. Pull the vibration motor out of its plastic frame, being careful not to strain the wires connecting it to the motherboard.
    • Pull the vibration motor out of its plastic frame, being careful not to strain the wires connecting it to the motherboard.

  8. Use a soldering iron to de-solder both vibration motor wires from the motherboard.
    • Use a soldering iron to de-solder both vibration motor wires from the motherboard.

    • Not too much experience with soldering? Check out our soldering guide for detailed instructions.

    • The positive (red) wire connects nearest the top of the motherboard.

    • When soldering on circuit boards, be sure not to overheat the connection as permanent damage may result.

  9. If desired, repeat this procedure for the other vibration motor. The two vibration motors are non-interchangeable, as the left motor has more counterweights than the right motor.
    • If desired, repeat this procedure for the other vibration motor.

    • The two vibration motors are non-interchangeable, as the left motor has more counterweights than the right motor.

まとめ

To reassemble your device, follow these instructions in reverse order.

10 の人々がこのガイドを完成させました。

Andrew Bookholt

508,669 ポイント

618のガイドは作成済み

That is not how the innards of a European Model DS3 controller are. Wrong guide. Not useful at all

Stathis Kiriakos - 返信

My DS3’s rumble motor died out after 8 years of use so i went out and came to know that there’re many such motors available on market,so i wanna know exact specifications of the rumble motors (both left and right ones) on Dualshock 3 controller,like Voltage,RPM,Dimensions,weight and so.

Please can you provide me the required info ?

montgomeryjohnny - 返信

統計データを表示:

過去 24時間: 9

過去 7 日: 59

過去 30 日: 225

今までの合計 29,360