メインコンテンツにスキップ

Fix Your Stuff

Right to Repair

Parts & Tools

はじめに

This guide will show you how to open up your device. You will then have access to all the internal components. The power switch can then be replaced with minimal effort

パーツ

パーツは指定されていません。

  1. Locate the battery at the back of your Dremel. Firmly grasp the battery on both sides and pull. It should easily come out of the battery well.
    • Locate the battery at the back of your Dremel. Firmly grasp the battery on both sides and pull. It should easily come out of the battery well.

  2. Remove the ring located around the speed selector switch by pulling apart on either side. This should require very minimal force.
    • Remove the ring located around the speed selector switch by pulling apart on either side. This should require very minimal force.

  3. Remove the collar wrench by pushing the gear lock button. Continue to hold this button as you rotate the wrench counter-clockwise until it is removed.
    • Remove the collar wrench by pushing the gear lock button. Continue to hold this button as you rotate the wrench counter-clockwise until it is removed.

  4. Remove the metal clasp from the battery well. This piece helps hold the plastic shell of the device together. Pry it out by gently applying some force with a screwdriver.
    • Remove the metal clasp from the battery well. This piece helps hold the plastic shell of the device together. Pry it out by gently applying some force with a screwdriver.

  5. Remove five T9 Torx screws from the side of the tool. Now pull apart the plastic shell of the device. If you are not able to, review the previous steps as you may have missed one. Now pull apart the plastic shell of the device. If you are not able to, review the previous steps as you may have missed one.
    • Remove five T9 Torx screws from the side of the tool.

    • Now pull apart the plastic shell of the device. If you are not able to, review the previous steps as you may have missed one.

  6. Remove the faulty power switch. It should come out of the device without using any force.
    • Remove the faulty power switch. It should come out of the device without using any force.

終わりに

To reassemble your device, follow these instructions in reverse order.

3 の人々がこのガイドを完成させました。

Shailing Santiago

メンバー登録日: 2016年03月08日

313 ポイント

2のガイドは作成済み

チーム

UMass Dartmouth, Team 2-8, Isaacson Spring 2016 UMass Dartmouth, Team 2-8, Isaacson Spring 2016人のメンバー

UMASSD-ISAACSON-S16S2G8

3 メンバー

5のガイドは作成済み

コメント1件

Awesome!! Thanks!

christooher t - 返信

コメントを追加

統計データを表示:

過去 24時間: 1

過去 7 日: 2

過去 30 日: 16

今までの合計 558