修理を始めるには コミュニティ ストア

Dremel 7300 MiniMite Cordless Motor-Shaft Assembly Replacement

はじめに

If the motor burns up or the power switch breaks, you are going to need a whole new motor and shaft for the device, as they come as one piece. This guide will show how to dissemble and remove the motor-shaft assembly.

必要な工具と部品

  1. Dremel 7300 MiniMite Cordless Motor-Shaft Assembly Replacement, Battery: 手順 1、 3の画像 1 Dremel 7300 MiniMite Cordless Motor-Shaft Assembly Replacement, Battery: 手順 1、 3の画像 2 Dremel 7300 MiniMite Cordless Motor-Shaft Assembly Replacement, Battery: 手順 1、 3の画像 3

    • Pull back on the release tabs to disconnect the battery pack from the housing.

    • When installing a new battery, you may need to charge it before using it.

    編集

  2. Dremel 7300 MiniMite Cordless Motor-Shaft Assembly Replacement, Motor-Shaft Assembly: 手順 2、 3の画像 1 Dremel 7300 MiniMite Cordless Motor-Shaft Assembly Replacement, Motor-Shaft Assembly: 手順 2、 3の画像 2 Dremel 7300 MiniMite Cordless Motor-Shaft Assembly Replacement, Motor-Shaft Assembly: 手順 2、 3の画像 3

    • Remove the two screws from the back of the device with the TR10 Torx Security screwdriver.

    • Make sure you have removed the battery before proceeding as accidentally powering-on the device while disassembling is dangerous due to the high-speed components inside.

    編集

  4. Dremel 7300 MiniMite Cordless Motor-Shaft Assembly Replacement: 手順 3、 3の画像 1 Dremel 7300 MiniMite Cordless Motor-Shaft Assembly Replacement: 手順 3、 3の画像 2 Dremel 7300 MiniMite Cordless Motor-Shaft Assembly Replacement: 手順 3、 3の画像 3

    • Lift off the unscrewed plastic cover at an angle, away from the tip of the device.

    • Gently lift the cover. It won't take much force to remove it.

    編集

  5. Dremel 7300 MiniMite Cordless Motor-Shaft Assembly Replacement: 手順 4、 3の画像 1 Dremel 7300 MiniMite Cordless Motor-Shaft Assembly Replacement: 手順 4、 3の画像 2 Dremel 7300 MiniMite Cordless Motor-Shaft Assembly Replacement: 手順 4、 3の画像 3

    • Lift the tip of the motor-shaft assembly gently, then pull the assembly out.

    • The blue battery contact and the spring for the shaft lock button may pop out when you remove the motor-shaft assembly. Make sure to keep track of these pieces, as they are very small.

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

3 の人々がこのガイドを完成させました。

作成者

5人の作成者と共同で作成されました。

Michael Smith

メンバー登録日: 02/10/16

175 ポイント

1ガイドが承認済み

バッジ: 7

+4 個以上のバッジ

チーム

USF Tampa, Team 3-4, Sullivan Spring 2016 USF Tampa, Team 3-4, Sullivan Spring 2016人のメンバー

USFT-SULLIVAN-S16S3G4

4 メンバー

4のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 6

過去 30 日: 42

今までの合計 3,085