メインコンテンツにスキップ

はじめに

If you need to replace the collet nut or collet itself, this is the guide for you.

ツール

パーツ

パーツは指定されていません。

  1. Dremel 7300 MiniMite Cordless Collet Replacement, Collet: 手順 1、 3の画像 1 Dremel 7300 MiniMite Cordless Collet Replacement, Collet: 手順 1、 3の画像 2 Dremel 7300 MiniMite Cordless Collet Replacement, Collet: 手順 1、 3の画像 3
    • The device comes with a small black wrench to tighten the collet nut, during reassembly or changing the bits.

    • Press the blue button and hold it down.

    • Unscrew the collet nut, with your fingers (as if you were going to change the bit).

    • Continue until the collet nut comes completely off of the Dremel.

  2. Dremel 7300 MiniMite Cordless Collet Replacement: 手順 2、 3の画像 1 Dremel 7300 MiniMite Cordless Collet Replacement: 手順 2、 3の画像 2 Dremel 7300 MiniMite Cordless Collet Replacement: 手順 2、 3の画像 3
    • Once the collet nut is off, you can remove the collet. It is the silver part that grips the bit when the collet nut tightens on it.

    • The collet itself may be in the shaft, or come off with the nut.

終わりに

To reassemble your device, follow these instructions in reverse order.

7 の人々がこのガイドを完成させました。

Kat

メンバー登録日: 2016年02月10日

840 ポイント

3のガイドは作成済み

チーム

USF Tampa, Team 3-4, Sullivan Spring 2016 USF Tampa, Team 3-4, Sullivan Spring 2016人のメンバー

USFT-SULLIVAN-S16S3G4

4 メンバー

4のガイドは作成済み

2 件のコメント

Too anyone having trouble unscrewing the collet, you may want to clamp vice grips on if its stuck tight. Worked for me.

Will - 返信

I easily removed the bit by holding the blue button and using the black wrench to loosen it and then I remove the silver piece that holds the bit then when I tried to use another one of the attachments it seems like it’s too large to fit in there I haven’t been able to use any of the other attachments like polishing and the finer little grinders

Kate Denkers - 返信

コメントを追加

統計データを表示:

過去 24時間: 1

過去 7 日: 2

過去 30 日: 28

今までの合計 32,090