修理を始めるには コミュニティ ストア

Disassembling the Canon PowerShot A200 Case

はじめに

These are instructions to disassemble the camera case so that internal components can be accessed.

This is a prerequisite guide for repairs to the Canon PowerShot A200.

必要な工具と部品

  1. Disassembling the Canon PowerShot A200 Case, Disassembling the Canon PowerShot A200 Case: 手順 1、 1の画像 1

    • Use a Phillips #00 screwdriver to remove the two screws at the bottom of the camera.

    編集

  2. Disassembling the Canon PowerShot A200 Case: 手順 2、 2の画像 1 Disassembling the Canon PowerShot A200 Case: 手順 2、 2の画像 2

    • Locate a screw and a rubber covering on the left side of the camera. Slide the rubber covering to expose a second screw.

    • Remove both screws with the Phillips #00 screwdriver.

    編集

  3. Disassembling the Canon PowerShot A200 Case: 手順 3、 2の画像 1 Disassembling the Canon PowerShot A200 Case: 手順 3、 2の画像 2

    • Open the battery compartment on the right side of the camera by pushing slightly in the direction of the arrow.

    • Be sure to remove the memory card.

    • Remove the two screws by the memory card slot using the Phillips #00 screwdriver.

    編集

  5. Disassembling the Canon PowerShot A200 Case: 手順 4、 2の画像 1 Disassembling the Canon PowerShot A200 Case: 手順 4、 2の画像 2

    • Pull the grey tab towards the back of the camera. Lift the black cover to expose the battery slots.

    • Remove the two visible screws with the Phillips #00 screwdriver.

    • During reassembly, the holes for these screws must align properly with the interior of the camera body. Then the black battery cover must lie flat and be held in place by the grey tab.

    編集

  6. Disassembling the Canon PowerShot A200 Case: 手順 5、 2の画像 1 Disassembling the Canon PowerShot A200 Case: 手順 5、 2の画像 2

    • Remove the screen battery located to the left of the screen.

    編集

  7. Disassembling the Canon PowerShot A200 Case: 手順 6、 2の画像 1 Disassembling the Canon PowerShot A200 Case: 手順 6、 2の画像 2

    • Gently pull the camera apart from the top.

    • Be careful. The two halves are still attached by two short ribbons at the bottom of the camera.

    編集

  8. Disassembling the Canon PowerShot A200 Case: 手順 7、 2の画像 1 Disassembling the Canon PowerShot A200 Case: 手順 7、 2の画像 2

    • Locate the black tabs on either side of the white ribbon.

    • Use the metal tweezers to gently move these tabs to the outside edges of the ribbon.

    • Gently pull the white ribbon out from its connection.

    編集

  9. Disassembling the Canon PowerShot A200 Case: 手順 8、 3の画像 1 Disassembling the Canon PowerShot A200 Case: 手順 8、 3の画像 2 Disassembling the Canon PowerShot A200 Case: 手順 8、 3の画像 3

    • Locate the black tabs on either side of the orange ribbon.

    • Use the metal tweezers to gently move these tabs to the outside edges of the ribbon.

    • Gently pull the orange ribbon out of its connection.

    • Your camera will now be in two separate pieces.

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

16人の作成者と共同で作成されました。

Daniel Stone

メンバー登録日: 01/28/11

101 ポイント

1ガイドが承認済み

バッジ: 4

+1 以上のバッジ

チーム

Cal Poly, Team 7-37, Regan Winter 2011 Cal Poly, Team 7-37, Regan Winter 2011人のメンバー

CPSU-REGAN-W11S7G37

4 メンバー

10のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 3

今までの合計 655