パーツ

パーツは必要ありません。

Begin by removing the rubber grip along the handle.
  • Begin by removing the rubber grip along the handle.

コメントを追加する

Remove the screws from the top to take the metal piece and plastic part off.
  • Remove the screws from the top to take the metal piece and plastic part off.

コメントを追加する

Pry open the plastic cover into two separate pieces. The plastic is very durable so don't worry about breaking it upon prying it open.
  • Pry open the plastic cover into two separate pieces. The plastic is very durable so don't worry about breaking it upon prying it open.

コメントを追加する

Here is the final result. This gives access to the switch button, chip set, battery and motor.
  • Here is the final result. This gives access to the switch button, chip set, battery and motor.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

11 の人々がこのガイドを完成させました。

nathan

メンバー登録日: 2013年10月22日

1,129 ポイント

6のガイドは作成済み

チーム

University of Maryland, Team 1-3, Shastany Fall 2013 University of Maryland, Team 1-3, Shastany Fall 2013人のメンバー

UMD-SHASTANY-F13S1G3

3 メンバー

6のガイドは作成済み

コメント1件

Well this does not show how to properly remove the metal piece that surrounds the power button , which needs to be removed to access 2 screws ( that I can see it) that need to be removed to completely separate the plastic encasement of the intrrnals has

Andrew Beeson - 返信

コメントを追加する

統計データを表示:

過去 24時間: 9

過去 7 日: 70

過去 30 日: 289

今までの合計 20,181