メインコンテンツにスキップ

Disassembling TomTom One XL Back Panel

必要な工具と部品

  1. Disassembling TomTom One XL Back Panel, Back Panel: 手順 1、 2の画像 1 Disassembling TomTom One XL Back Panel, Back Panel: 手順 1、 2の画像 2
    • Remove the 4 .4mm screws on the back of the device.

  2. Disassembling TomTom One XL Back Panel: 手順 2、 1の画像 1
    • Using the palate knife tool, pry the back from the LCD screen. Apply a moderate pressure to separate them.

    • You can rotate TOMTOM XL to make prying back off easier.

    • Be careful not to injure the two wires connecting the pieces.

  3. Disassembling TomTom One XL Back Panel: 手順 3、 1の画像 1
    • After prying both halves apart, they will be connected by two wires.

    • Carefully set the two halves next to each other making sure not to stress or damage the wires.

  4. Disassembling TomTom One XL Back Panel: 手順 4、 2の画像 1 Disassembling TomTom One XL Back Panel: 手順 4、 2の画像 2
    • Using the tweezers separate the wires connecting the battery and speaker to the mother board.

    • Be gentle while pulling the wires out, the plugs are easily injured.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

3人の作成者と共同で作成されました。

DeVhan

メンバー登録日: 03/11/15

401 ポイント

4のガイドは作成済み

チーム

Colorado Springs, Team 9-6, Panko Spring 2015 Colorado Springs, Team 9-6, Panko Spring 2015人のメンバー

UCCS-PANKO-S15S9G6

3 メンバー

5のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 2

今までの合計 447