修理を始めるには コミュニティ ストア

Disassembling Soundmates V2 Case

はじめに

My earbuds got run over a while ago, so let's take the case apart too! I'm hoping I can reuse the circuitry for another project

必要な工具と部品

  1. Disassembling Soundmates V2 Case, Soundmates V2 Case: 手順 1、 2の画像 1 Disassembling Soundmates V2 Case, Soundmates V2 Case: 手順 1、 2の画像 2

    • Flip open the cover and insert a thin flathead screwdriver in the seam by the hinge

    • Rotate the screwdriver just enough to create a gap between the two halves of the case

    • If this doesn't work very well, try the other side

    • Insert a spudger or another flathead bit into the new gap

    • This may cause some cosmetic damage

    編集

  2. Disassembling Soundmates V2 Case: 手順 2、 3の画像 1 Disassembling Soundmates V2 Case: 手順 2、 3の画像 2 Disassembling Soundmates V2 Case: 手順 2、 3の画像 3

    • Once you've created a small gap, the lid should come off fairly easily

    • Run the spudger around the case until the two halves separate

    • If the top half doesn't come straight up and out, it may break off the charging port, like it did with mine. Go slowly and use caution

    編集

  4. Disassembling Soundmates V2 Case: 手順 3、 1の画像 1

    • Remove the two Philips #00 screws securing the board

    編集

  5. Disassembling Soundmates V2 Case: 手順 4、 1の画像 1

    • Gently lift the circuitboard off. Not too high; it's still wired to the battery

    • Now just pull off the battery; it's only held down by a sticky foam pad

    編集

  6. Disassembling Soundmates V2 Case: 手順 5、 1の画像 1

    • Done! Hope you didn't break anything like I did.

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

1人の作成者と共同作成されました。

darth mango

メンバー登録日: 03/13/23

2,204 ポイント

3のガイドは作成済み

バッジ: 25

+22 個以上のバッジ

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 5

過去 30 日: 17

今までの合計 33