メインコンテンツにスキップ

Disassembling Sony Vaio VGN-FW 590 Audio USB Board

必要な工具と部品

  1. Disassembling Sony Vaio VGN-FW 590 Audio USB Board, Audio USB Board: 手順 1、 1の画像 1
    • - Remove battery.

    • - Remove memory tray door (1 Screw).

    • - Remove hard drive door (1 Screw).

    • - Remove hard drive (3 Screws).

  2. Disassembling Sony Vaio VGN-FW 590 Audio USB Board: 手順 2、 1の画像 1
    • - Remove all screws from the bottom cover. There are three types of screws. Marked here with Red Circles, Red Squares and Orange Circles.

  3. Disassembling Sony Vaio VGN-FW 590 Audio USB Board: 手順 3、 1の画像 1
    • - Remove CD/DVD Drive by sliding it out.

    • - Remove three more screws, which were hiding under the DVD drive.

  4. Disassembling Sony Vaio VGN-FW 590 Audio USB Board: 手順 4、 1の画像 1
    • - Carefully remove the cover, by unpopping it with a slim flathead, slide it out away from the RJ-45, HDMI and VGA ports.

  5. Disassembling Sony Vaio VGN-FW 590 Audio USB Board: 手順 5、 1の画像 1
    • - The audio/usb interface card is now within reach. Just remove the two screws and carefully slide out the flat connector to remove the card.

  6. Disassembling Sony Vaio VGN-FW 590 Audio USB Board: 手順 6、 1の画像 1
    • - Fire up the air compressor and blow out dust from the fan and heatsinks.

  7. Disassembling Sony Vaio VGN-FW 590 Audio USB Board: 手順 7、 1の画像 1
    • - If you are replacing your RAM, simply unpop the four latches and slide out the memory sticks.

終わりに

To reassemble your device, follow these instructions in reverse order.

8 の人々がこのガイドを完成させました。

作成者

2人の作成者と共同で作成されました。

Artem Nikulkov

メンバー登録日: 10/22/10

313 ポイント

1ガイドが承認済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 4

過去 30 日: 20

今までの合計 21,081