メインコンテンツにスキップ

Disassembling Sony Reader Touch Edition PRS-600 Side and Bottom Panel

必要な工具と部品

  1. Disassembling Sony Reader Touch Edition PRS-600 Side and Bottom Panel, Back Panel: 手順 1、 1の画像 1
    • Using the Phillips head screwdriver PH000, remove the two 1.4 mm screws that are located on the backside of the device.

  2. Disassembling Sony Reader Touch Edition PRS-600 Side and Bottom Panel: 手順 2、 1の画像 1
    • Slide the back cover off by pushing it to the left, away from the side that held the screws.

    • Remove the cover.

  3. Disassembling Sony Reader Touch Edition PRS-600 Side and Bottom Panel: 手順 3、 1の画像 1
    • This is what the device should look like once the back cover panel has been removed.

  4. Disassembling Sony Reader Touch Edition PRS-600 Side and Bottom Panel, Power Button: 手順 4、 1の画像 1
    • Remove the stylus from the device.

  5. Disassembling Sony Reader Touch Edition PRS-600 Side and Bottom Panel: 手順 5、 3の画像 1 Disassembling Sony Reader Touch Edition PRS-600 Side and Bottom Panel: 手順 5、 3の画像 2 Disassembling Sony Reader Touch Edition PRS-600 Side and Bottom Panel: 手順 5、 3の画像 3
    • Using the Phillips screwdriver remove the 1.4 mm screw from the top panel.

    • Using the same screwdriver, remove the 1.4 mm screw from the back of the device.

    • Pry apart off the top panel of the device.

  6. Disassembling Sony Reader Touch Edition PRS-600 Side and Bottom Panel, Side and Bottom Panel: 手順 6、 2の画像 1 Disassembling Sony Reader Touch Edition PRS-600 Side and Bottom Panel, Side and Bottom Panel: 手順 6、 2の画像 2
    • Using a Phillips head screwdriver, remove the two 1.4 mm screws from the bottom panel of the device.

    • Using the same screwdriver, remove the 1.4 mm screw that is located on the back of the device.

  7. Disassembling Sony Reader Touch Edition PRS-600 Side and Bottom Panel: 手順 7、 2の画像 1 Disassembling Sony Reader Touch Edition PRS-600 Side and Bottom Panel: 手順 7、 2の画像 2
    • Pull the panel away from the device. You may have to use the flat end of the spudger to remove the side portion of the panel because it will be glued in place.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

3人の作成者と共同で作成されました。

Zachary Jeffers

メンバー登録日: 10/13/14

412 ポイント

4のガイドは作成済み

チーム

Clemson, Team 1-4, Benson Fall 2014 Clemson, Team 1-4, Benson Fall 2014人のメンバー

CLEM-BENSON-F14S1G4

4 メンバー

22のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 3

今までの合計 280