はじめに

This guide will help you to disassemble your Sony Ericsson T68i.

Remove the battery from the back. Remove the battery from the back.
  • Remove the battery from the back.

コメントを追加する

Remove the plastic cover from the back. Pry it off from the top first with a thin plastic shim, then remove it from the two bottom clips. When removing the top part do not bend it too far down, or else you risk breaking the two bottom clips. When removing the top part do not bend it too far down, or else you risk breaking the two bottom clips.
  • Remove the plastic cover from the back. Pry it off from the top first with a thin plastic shim, then remove it from the two bottom clips.

  • When removing the top part do not bend it too far down, or else you risk breaking the two bottom clips.

コメントを追加する

Unscrew all four Torx T6 screws. Keep in a safe place. Keep in a safe place.
  • Unscrew all four Torx T6 screws.

  • Keep in a safe place.

コメントを追加する

After removing the screws, the two halves will separate.  If not, then pry them gently apart. After removing the screws, the two halves will separate.  If not, then pry them gently apart. After removing the screws, the two halves will separate.  If not, then pry them gently apart.
  • After removing the screws, the two halves will separate. If not, then pry them gently apart.

コメントを追加する

Pull off the keypad. Pull off the keypad.
  • Pull off the keypad.

コメントを追加する

Gently pull off the infra red window and the vibra motor. Gently pull off the infra red window and the vibra motor. Gently pull off the infra red window and the vibra motor.
  • Gently pull off the infra red window and the vibra motor.

コメントを追加する

Remove the circuit board and screen from the device. Use your T6 to remove the 4 screws holding the cover on. Use your T6 to remove the 4 screws holding the cover on.
  • Remove the circuit board and screen from the device.

  • Use your T6 to remove the 4 screws holding the cover on.

コメントを追加する

Remove the board and screen. Remove the board and screen. Remove the board and screen.
  • Remove the board and screen.

コメントを追加する

Lever out the microphone using a small screwdriver or any similar tool. Lever out the microphone using a small screwdriver or any similar tool.
  • Lever out the microphone using a small screwdriver or any similar tool.

コメントを追加する

Carefully remove the plastic clips holding the screen on the board. Carefully remove the plastic clips holding the screen on the board. Carefully remove the plastic clips holding the screen on the board.
  • Carefully remove the plastic clips holding the screen on the board.

コメントを追加する

Remove the speaker located in the screen housing just above the screen. Gently pry it out with a small screwdriver or similar tool. Gently pry it out with a small screwdriver or similar tool.
  • Remove the speaker located in the screen housing just above the screen.

  • Gently pry it out with a small screwdriver or similar tool.

コメントを追加する

Remove the plate from the circuit board protecting the more delicate processing parts. Remove the plate from the circuit board protecting the more delicate processing parts. Remove the plate from the circuit board protecting the more delicate processing parts.
  • Remove the plate from the circuit board protecting the more delicate processing parts.

コメントを追加する

Congratulations, you have successfully disassembled your Sony Ericsson T68i!
  • Congratulations, you have successfully disassembled your Sony Ericsson T68i!

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

3 の人々がこのガイドを完成させました。

Tim Dascomb

メンバー登録日: 2010年04月13日

123 ポイント

13のガイドは作成済み

チーム

Cal Poly, Team 26-34, Regan Spring 2010 Cal Poly, Team 26-34, Regan Spring 2010人のメンバー

CPSU-REGAN-S10S26G34

4 メンバー

13のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 14

今までの合計 5,486