危険
潜在的な危険
この手順に正しく従わない場合は損傷が生じる可能性があります。ご注意のうえ使用し、すべての警告に従ってください。
危険

はじめに

My autofocus bearings were stopped, I could focus only between min to 0.5m. This will show how to reach a part which moves the lens and makes it to zoom and focus.

Done by Rimvydas Gudeliauskas

パーツ

パーツは必要ありません。

  1. Take the lens away from camera
    • Take the lens away from camera

    • DO NOT FORGET: THAT YOU ARE DOING ALL ON YOUR OWN RESPONSIBILITY

  2. Unscrew the top part and detach it. Unjoin cables. Be careful; they're delicate, and easily torn.
    • Unscrew the top part and detach it.

    • Unjoin cables. Be careful; they're delicate, and easily torn.

      • Try to avoid contact with the sensitive electronic components.

    • Unfasten the screws that hold the circuit board in place, and separate it from the rest of the lens assembly.

  3. Free shipping on all orders over $100.00 or containing a Pro Tech Toolkit!

    当社のショップを閲覧する
  4. Take away zoom rubber and you will find srews
    • Take away zoom rubber and you will find srews

  5. Just take parts you need until you reach what you want to fix Zoom bearing can be taken away by unscrewing its srews.
    • Just take parts you need until you reach what you want to fix

    • Zoom bearing can be taken away by unscrewing its srews.

  6. Here is one of the parts which was broken, so I go to camera repair shop, and bought that parts. As this was not the only part broken, I had to leave for additional repair.
    • Here is one of the parts which was broken, so I go to camera repair shop, and bought that parts. As this was not the only part broken, I had to leave for additional repair.

    • When you finish you can put all back together

まとめ

To reassemble your device, follow these instructions in reverse order.

6 の人々がこのガイドを完成させました。

Rimvydas

メンバー登録日: 2012年03月29日

296 ポイント

1ガイドが承認済み

統計データを表示:

過去 24時間: 1

過去 7 日: 18

過去 30 日: 118

今までの合計 25,031