メインコンテンツにスキップ

はじめに

How to take out the buttons and replace them.

パーツ

パーツは指定されていません。

  1. Locate the battery cover on the bottom of the camera.
    • Locate the battery cover on the bottom of the camera.

  2. Place your thumb on the battery cover and push towards the arrow. The cover will release and pop open.
    • Place your thumb on the battery cover and push towards the arrow. The cover will release and pop open.

  3. iPhoneのバッテリーキット

    Only $29.99

    Buy Now

    iPhoneのバッテリーキット

    Only $29.99

    Buy Now
  4. Remove the batteries from the camera.
    • Remove the batteries from the camera.

  5. Unscrew and remove four (3mm) screws on the right side of the camera. This will release the front and back casings.
    • Unscrew and remove four (3mm) screws on the right side of the camera. This will release the front and back casings.

  6. Use your nail or a flat object to pry up the edge of the front casing. Push the casing up and back.
    • Use your nail or a flat object to pry up the edge of the front casing. Push the casing up and back.

    • Repeat this step for the back casing.

  7. Pop the necessary buttons out of the plastic housing.
    • Pop the necessary buttons out of the plastic housing.

まとめ

To reassemble your device, follow these instructions in reverse order.

Dani

メンバー登録日: 2010年06月24日

21 ポイント

7のガイドは作成済み

チーム

Cal Poly, Team 3-3, Johann Summer 2010 Cal Poly, Team 3-3, Johann Summer 2010人のメンバー

CPSU-JOHANN-R10S3G3

2 メンバー

7のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 824