メインコンテンツにスキップ

Disassembling Pentax PZ-10 Top Cover

必要な工具と部品

  1. Disassembling Pentax PZ-10 Top Cover, Top Cover: 手順 1、 1の画像 1
    • The top cover is one piece encasing the top of the device except the shutter release button and flash.

  2. Disassembling Pentax PZ-10 Top Cover, Removing Upper Right Housing Screw: 手順 2、 2の画像 1 Disassembling Pentax PZ-10 Top Cover, Removing Upper Right Housing Screw: 手順 2、 2の画像 2
    • With the camera lens face down, locate the screw under the overhanging piece of the top casing on the right side of the back panel.

    • Using the J0 screwdriver, remove the 6.3 mm screw.

  3. Disassembling Pentax PZ-10 Top Cover, Removing Screw in Battery Compartment: 手順 3、 2の画像 1 Disassembling Pentax PZ-10 Top Cover, Removing Screw in Battery Compartment: 手順 3、 2の画像 2
    • Locate the next screw by holding the camera upside down with the battery compartment empty and face up.

    • Remove the 6.3 mm screw using a J0 screwdriver.

  4. Disassembling Pentax PZ-10 Top Cover, Removing Screw Under Flash Bulb: 手順 4、 2の画像 1 Disassembling Pentax PZ-10 Top Cover, Removing Screw Under Flash Bulb: 手順 4、 2の画像 2
    • The next screw is found in the overhanging piece just above the lens.

    • With the top of the camera facing down, remove the 3.4 mm screw with a J0 screwdriver.

  5. Disassembling Pentax PZ-10 Top Cover, Pulling Off the Top Cover: 手順 5、 2の画像 1 Disassembling Pentax PZ-10 Top Cover, Pulling Off the Top Cover: 手順 5、 2の画像 2
    • Gently pull off the top cover with your hands by pulling on the tab on the left of the camera.

終わりに

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

作成者

5人の作成者と共同で作成されました。

Jonathan Diaz

メンバー登録日: 04/20/15

213 ポイント

2のガイドは作成済み

コメント 1 件

Thank you! Well done sir!

michaelsteele1953 - 返信

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 9

今までの合計 961