Press down on the button located at the bottom of the phone, using the center ridge as a guide. Pull the phone apart from the bottom, keeping the button pressed down.
  • Press down on the button located at the bottom of the phone, using the center ridge as a guide.

  • Pull the phone apart from the bottom, keeping the button pressed down.

  • CAUTION! The plastic opening tool may be used to gain leverage. Some force is required to open.

コメントを追加する

Remove the back cover to expose the battery.
  • Remove the back cover to expose the battery.

コメントを追加する

Place a finger or plastic opening tool in the gap between the battery and the phone. Gently lift the battery out.
  • Place a finger or plastic opening tool in the gap between the battery and the phone.

  • Gently lift the battery out.

コメントを追加する

Locate the plastic latches on the left and right sides of the phone. Insert the plastic opening tool or a fingernail into each latch and pry them open individually.
  • Locate the plastic latches on the left and right sides of the phone.

  • Insert the plastic opening tool or a fingernail into each latch and pry them open individually.

  • CAUTION! Some force is required.

コメントを追加する

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Remove the faceplate with the number pad attached.
  • Remove the faceplate with the number pad attached.

コメントを追加する

Turn the faceplate so the number pad faces downward.
  • Turn the faceplate so the number pad faces downward.

  • Lift the number pad out of the faceplate.

コメントを追加する

Locate the six screws positions along the edges of the motherboard. Unscrew the six screws using the Torx 5 screwdriver (see Introduction for description of a Torx 5 screwdriver).
  • Locate the six screws positions along the edges of the motherboard.

  • Unscrew the six screws using the Torx 5 screwdriver (see Introduction for description of a Torx 5 screwdriver).

  • CAUTION! Place the screws in a secure location.

コメントを追加する

Locate the orange ribbon tape connecting the metal display plate to the motherboard. Lift the black latch attaching the tape to the motherboard.
  • Locate the orange ribbon tape connecting the metal display plate to the motherboard.

  • Lift the black latch attaching the tape to the motherboard.

  • Gently pull the tape out of the latch slot to remove the metal display.

コメントを追加する

Using the plastic opening tool, gently pry off the motherboard from the plastic shell. CAUTION! When pulling the motherboard out, be careful not to damage the battery under the lower left hand corner of the motherboard.
  • Using the plastic opening tool, gently pry off the motherboard from the plastic shell.

  • CAUTION! When pulling the motherboard out, be careful not to damage the battery under the lower left hand corner of the motherboard.

コメントを追加する

Turn the motherboard over and locate the orange ribbon tape connecting the display to the motherboard.
  • Turn the motherboard over and locate the orange ribbon tape connecting the display to the motherboard.

  • Gently pull the tape up to remove the display.

コメントを追加する

Locate the camera component in the plastic shell removed from underneath the motherboard (It is one piece).
  • Locate the camera component in the plastic shell removed from underneath the motherboard (It is one piece).

  • Gently pull out the camera component using either a finger or plastic opening tool.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

Ian VanZandt

メンバー登録日: 2012年02月14日

600 ポイント

9のガイドは作成済み

チーム

James Madison, Team 3-1, Klein Spring 2012 James Madison, Team 3-1, Klein Spring 2012人のメンバー

JMU-KLEIN-S12S3G1

3 メンバー

9のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 2

今までの合計 726