メインコンテンツにスキップ

はじめに

This guide will show you how to remove the assembly that houses the phone's keypad, speaker and screen.

パーツ

パーツは指定されていません。

  1. Press the button to remove the back cover. Pull the cover downward and lift it off while still pressing the button.
    • Press the button to remove the back cover.

    • Pull the cover downward and lift it off while still pressing the button.

  2. Lift the battery out of the phone by pushing down from the top and pulling out
    • Lift the battery out of the phone by pushing down from the top and pulling out

  3. Grip the front cover from the bottom.
    • Grip the front cover from the bottom.

  4. iPhoneのバッテリーキット

    Only $29.99

    Buy Now

    iPhoneのバッテリーキット

    Only $29.99

    Buy Now
  5. Lift the front cover off.
    • Lift the front cover off.

  6. Locate 6 screws on front of assembly and unscrew them using a T6 torx screwdriver.
    • Locate 6 screws on front of assembly and unscrew them using a T6 torx screwdriver.

  7. Insert spudger along edge of assembly and gently lift assembly away from case
    • Insert spudger along edge of assembly and gently lift assembly away from case

  8. Remove assembly from phone
    • Remove assembly from phone

まとめ

To reassemble your device, follow these instructions in reverse order.

Colby Leslie

メンバー登録日: 2010年10月05日

1 ポイント

7のガイドは作成済み

チーム

Cal Poly, Team 22-3, Maness Fall 2010 Cal Poly, Team 22-3, Maness Fall 2010人のメンバー

CPSU-MANESS-F10S22G3

4 メンバー

9のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 2

今までの合計 906