はじめに

This guide details how to remove the internal backplate to expose the speaker, the headphone jack, and the logic board.

Slide the notch downward while pulling the back cover off to remove it. Slide the notch downward while pulling the back cover off to remove it. Slide the notch downward while pulling the back cover off to remove it.
  • Slide the notch downward while pulling the back cover off to remove it.

コメントを追加する

Use your fingers to push the battery upward from the bottom. Lift upwards to remove the battery. Lift upwards to remove the battery.
  • Use your fingers to push the battery upward from the bottom.

  • Lift upwards to remove the battery.

コメントを追加する

Unscrew the antenna in a counter-clockwise fashion. Remove the aluminum cover.
  • Unscrew the antenna in a counter-clockwise fashion.

  • Remove the aluminum cover.

コメントを追加する

Unscrew the 3 screws shown. Lift up the right part of the Nextel logo and unscrew the screw underneath. Lift up the right part of the Nextel logo and unscrew the screw underneath.
  • Unscrew the 3 screws shown.

  • Lift up the right part of the Nextel logo and unscrew the screw underneath.

コメントを追加する

DO NOT force the cover off as it could damage the ribbon cable! Gently lift the back cover off.
  • DO NOT force the cover off as it could damage the ribbon cable!

  • Gently lift the back cover off.

コメントを追加する

Carefully pry off the connection between the headphone jack and logic board. Carefully pry off the connection between the headphone jack and logic board. Carefully pry off the connection between the headphone jack and logic board.
  • Carefully pry off the connection between the headphone jack and logic board.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

Grant Glazebrook

メンバー登録日: 2010年04月14日

7 ポイント

2のガイドは作成済み

チーム

Cal Poly, Team 29-61, Johann Spring 2010 Cal Poly, Team 29-61, Johann Spring 2010人のメンバー

CPSU-JOHANN-S10S29G61

4 メンバー

6のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 1,241