はじめに

This guide serves to provide the user with information on how to disassemble the Motorola Q700 Sidekick.

  1. When looking at the front of the phone, use the Plastic Opening Tool to pry off the four buttons located in each of the corners on the front.
    • When looking at the front of the phone, use the Plastic Opening Tool to pry off the four buttons located in each of the corners on the front.

    コメントを追加する

  2. Turn the phone face-down. Remove the back cover, exposing the battery.
    • Turn the phone face-down. Remove the back cover, exposing the battery.

    • Use the Plastic Opening Tool to pry the battery out of the phone.

    コメントを追加する

    • Using the appropriate size Phillips screwdriver, unscrew the four screws located in each of the corners on the back of the device.

    • Although the battery is shown in this picture, please remember to make sure that it is removed in order to proceed with disassembly.

    コメントを追加する

    • After removal of the back screws, use the Plastic Opening Tool to carefully separate the top and bottom halves of the device.

    コメントを追加する

    • Using the appropriate size Phillips screwdriver, remove any screws that are attached or associated with the keypad and carefully remove keypad from the device.

    コメントを追加する

    • On the back of the device, you will see individual green and yellow technical pieces. Remove those two pieces from the phone with your fingers and set aside.

    コメントを追加する

    • You should now have all of the pieces separated and disassembled for your device.

    コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Rich

メンバー登録日: 2013年04月08日

125 ポイント

6のガイドは作成済み

チーム

SUNY Cortland, Team 1-4, Getto Spring 2013 SUNY Cortland, Team 1-4, Getto Spring 2013人のメンバー

SUNYCORT-GETTO-S13S1G4

4 メンバー

6のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 1

過去 7 日: 1

過去 30 日: 1

今までの合計 450