Disassembling Meyer Sound MM-4 Ultra Compact Wide-Range Loudspeaker Case

はじめに

With this guide you can take your MM-4 from one solid brick of a speaker to four parts and a bunch of screws. This is useful if you are replacing a bad driver, or if the connector becomes damaged and you need to replace it.

必要な工具と部品

手順1 Case

Disassembling Meyer Sound MM-4 Ultra Compact Wide-Range Loudspeaker Case, Case: 手順 1、 2の画像 1

Disassembling Meyer Sound MM-4 Ultra Compact Wide-Range Loudspeaker Case, Case: 手順 1、 2の画像 2

Turn the speaker face down, so the connector side is up.
Remove the four #2 Philips screws on the back plate.

編集

手順2

Remove the foam insert to expose the two spade connectors.
Carefully separate the connectors

編集

手順3

Turn the speaker so the grill side is up.
Remove the four screws on the grill. I had to use a t-10 Torx bit to remove them.
The grill is not glued on, but may require a bit of prying to remove.

編集

手順4

Remove the four silver bolts holding the speaker in place. These bolts also have threads inset for the grill screws to fit into.
This is a pretty quick and easy teardown, not too many parts in this one. The meyer speaker's part number is ST-164. It's a 16 Ohm driver.

編集