メインコンテンツにスキップ

Disassembling KDDI Kyocera A5521K SD Card Slot

必要な工具と部品

  1. Disassembling KDDI Kyocera A5521K SD Card Slot, Disassembling KDDI Kyocera A5521K Battery: 手順 1、 3の画像 1 Disassembling KDDI Kyocera A5521K SD Card Slot, Disassembling KDDI Kyocera A5521K Battery: 手順 1、 3の画像 2 Disassembling KDDI Kyocera A5521K SD Card Slot, Disassembling KDDI Kyocera A5521K Battery: 手順 1、 3の画像 3
    • Turn the phone over to expose the battery cover.

    • Apply pressure to the back of the battery cover to slide it down.

    • The battery cover is now separate from the phone.

  2. Disassembling KDDI Kyocera A5521K SD Card Slot: 手順 2、 3の画像 1 Disassembling KDDI Kyocera A5521K SD Card Slot: 手順 2、 3の画像 2 Disassembling KDDI Kyocera A5521K SD Card Slot: 手順 2、 3の画像 3
    • Remove the battery by pushing it up and out from the bottom.

    • The battery, cover, and phone should now be separated.

  3. Disassembling KDDI Kyocera A5521K SD Card Slot, Back Plate: 手順 3、 2の画像 1 Disassembling KDDI Kyocera A5521K SD Card Slot, Back Plate: 手順 3、 2の画像 2
    • Remove the four screws with the Y0 screwdriver.

  4. Disassembling KDDI Kyocera A5521K SD Card Slot: 手順 4、 2の画像 1 Disassembling KDDI Kyocera A5521K SD Card Slot: 手順 4、 2の画像 2
    • Remove the black, rubber screw caps towards the top of the back of the phone to reveal two additional screws.

    • Remove the two screws with a Y0 screwdriver.

  5. Disassembling KDDI Kyocera A5521K SD Card Slot: 手順 5、 3の画像 1 Disassembling KDDI Kyocera A5521K SD Card Slot: 手順 5、 3の画像 2 Disassembling KDDI Kyocera A5521K SD Card Slot: 手順 5、 3の画像 3
    • Rotate the phone 180 degrees.

    • Carefully separate the back plate from the remainder of the phone.

    • The back plate should now be detached from the rest of the phone.

  6. Disassembling KDDI Kyocera A5521K SD Card Slot, SD Card Slot: 手順 6、 3の画像 1 Disassembling KDDI Kyocera A5521K SD Card Slot, SD Card Slot: 手順 6、 3の画像 2 Disassembling KDDI Kyocera A5521K SD Card Slot, SD Card Slot: 手順 6、 3の画像 3
    • Rotate the phone approximately 45 degrees to the right.

    • Gently pry up the SD card slot with a spudger.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

4人の作成者と共同で作成されました。

Dominic Grisafe

メンバー登録日: 04/15/10

157 ポイント

10のガイドは作成済み

チーム

Cal Poly, Team 28-25, Regan Spring 2010 Cal Poly, Team 28-25, Regan Spring 2010人のメンバー

CPSU-REGAN-S10S28G25

4 メンバー

20のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 2,956