はじめに

These instructions will demonstrate how to remove the keyboard from the KDDI Kyocera A5521K.

パーツ

パーツは必要ありません。

  1. Turn the phone over to expose the battery cover.
    • Turn the phone over to expose the battery cover.

    • Apply pressure to the back of the battery cover to slide it down.

    • The battery cover is now separate from the phone.

    コメントを追加する

  2. Remove the battery by pushing it up and out from the bottom.
    • Remove the battery by pushing it up and out from the bottom.

    • The battery, cover, and phone should now be separated.

    コメントを追加する

    • Remove the four screws with the Y0 screwdriver.

    コメントを追加する

    • Remove the black, rubber screw caps towards the top of the back of the phone to reveal two additional screws.

    • Remove the two screws with a Y0 screwdriver.

    コメントを追加する

    • Rotate the phone 180 degrees.

    • Carefully separate the back plate from the remainder of the phone.

    • The back plate should now be detached from the rest of the phone.

    コメントを追加する

    • Lift up the bottom of the logic board.

    • Carefully remove the logic board from the lower half of the phone.

    • The logic board is connected to the remainder of the phone by two cables at the upper right corner indicated by the red circle. Do not damage the cables.

    コメントを追加する

    • Gently lift the keyboard up with a spudger.

    • The keyboard is now separate from the remainder of the phone and can be easily removed.

    コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

Dominic Grisafe

メンバー登録日: 2010年04月15日

157 ポイント

10のガイドは作成済み

チーム

Cal Poly, Team 28-25, Regan Spring 2010 Cal Poly, Team 28-25, Regan Spring 2010人のメンバー

CPSU-REGAN-S10S28G25

4 メンバー

20のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 3

今までの合計 1,196