修理を始めるには

修理する権利

ストア

この修理ガイドは変更されています。最新の未承認バージョンに切り替えます。

Disassembling Flip Video Circuit Board

作成者： Elizabeth (そして 5 人のその他投稿者)
  • コメント: 1
  • お気に入り: 0
  • 完了: 1

難易度

普通

手順

9

所要時間

10分

セクション

2

フラグ

0

はじめに

This guide will show you how to open your Flip Video and remove the main circuit board.

ツール

これらのツールを購入する

パーツ

パーツは指定されていません。

  1. Turn off the device and take the batteries out. Remove metal sticker under the LCD screen with a spudger.

    • Turn off the device and take the batteries out.

    • Remove metal sticker under the LCD screen with a spudger.

    • This may require a large force to pry off the glued sticker.

    翻訳

  2. Remove the 4 gray screw caps with the spudger. These cover the screw heads and protect from dirt or grime.

    • Remove the 4 gray screw caps with the spudger. These cover the screw heads and protect from dirt or grime.

    翻訳

  3. Remove the 5 10mm screws with the #00 Phillips screwdriver. These connect the back of the outer shell to the front of the outer shell. Remove the 5 10mm screws with the #00 Phillips screwdriver. These connect the back of the outer shell to the front of the outer shell.

    • Remove the 5 10mm screws with the #00 Phillips screwdriver. These connect the back of the outer shell to the front of the outer shell.

    翻訳

  4. The Essential Toolkit

    コンパクト版iFixitキットの中で最も利便性の高いツール

    ショップを見る

    The Essential Toolkit

    コンパクト版iFixitキットの中で最も利便性の高いツール

    ショップを見る

  5. Open battery door. This can be done by gently depressing and sliding the battery down downward.

    • Open battery door. This can be done by gently depressing and sliding the battery down downward.

    翻訳

  6. Use the spudger to separate outer shells.

    • Use the spudger to separate outer shells.

    • The spudger must be inserted between the shell halves to pry the edges apart.

    • Slowly work around the outside to separate the halves.

    翻訳

  7. Remove the 3 5mm screws securing the circuit board to the front shell with the #00 Phillips screwdriver.

    • Remove the 3 5mm screws securing the circuit board to the front shell with the #00 Phillips screwdriver.

    翻訳

  8. Slowly lift the left side of the circuit board.

    • Slowly lift the left side of the circuit board.

    • Do not attempt to remove the circuit board completely yet. It is still connected to the device.

    翻訳

  9. Disconnect the USB port cable from the back side of the circuit board.

    • Disconnect the USB port cable from the back side of the circuit board.

    翻訳

  10. Slide out the battery contacts.

    • Slide out the battery contacts.

    • Battery contacts

    • Slot where battery contacts were located

    翻訳
終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

5他の投稿者と一緒に

Elizabeth

メンバー登録日: 2010年04月15日

100 ポイント

6のガイドは作成済み

バッジ: 7

+4 個以上のバッジ

チーム

Cal Poly, Team 26-21, Regan Spring 2010 Cal Poly, Team 26-21, Regan Spring 2010人のメンバー

CPSU-REGAN-S10S26G21

4 メンバー

6のガイドは作成済み

コメント1件

コメントを追加

Thank you. Where is the reset button on these first generation Flip Videos (mine doesn’t have one visible on outside, must be on inside.

sherrygray - 返信

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 7

今までの合計 2,086