Parts

No parts required.

  1. Make sure the camera is turned off here.
    • Make sure the camera is turned off here.

    • Remove batteries from the battery compartment located on the bottom of the camera

    • Remove SD card for the card reader compartment located on the flat side (left side) of the camera

    Add Comment

  2. Remove 2 screws on the rounded side of the camera wisdom here.
    • Remove 2 screws on the rounded side of the camera wisdom here.

    Add Comment

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Remove 3 screws on the flat side of the camera

      • All silver screws go into the side of the camera that is silver

      • All black screws go into the side of the camera that is black

    Add Comment

    • Remove 4 screws from the bottom of the camera

    • All silver screws go into the side of the camera that is silver

    • All black screws go into the side of the camera that is black

    Add Comment

    • Separate the front and back pieces of the cameras plastic casing using a spudgerm here.

      • WARNING: When pulling the front plastic casing, be careful of the wire that are connected to the aperture control

      • Use minimal force so that the plastic casing does not break

      • When separating the small silver sliding indicator for view/off/playback may fall out

      • The plastic viewing window located on the top of the camera may also become lose and fall out

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Brittany

Member since: 02/12/2013

101 Reputation

1 Guide authored

Team

Ohio State, Team 1-5, Buehl Spring 2013 Member of Ohio State, Team 1-5, Buehl Spring 2013

OSU-BUEHL-S13S1G5

4 Members

3 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 43