メインコンテンツにスキップ

パーツ

パーツは指定されていません。

  1. Place the all in one computer face down on a soft, clean surface to avoid scratching the front. Press the tab on the stand cover and lift up. Press the tab on the stand cover and lift up.
    • Place the all in one computer face down on a soft, clean surface to avoid scratching the front.

    • Press the tab on the stand cover and lift up.

  2. MacBook Battery 修理キット

    最低価格 $69.99

    Buy Now

    MacBook Battery 修理キット

    最低価格 $69.99

    Buy Now
  3. Remove the four phillips screws that attach the stand to the computer. Tilt the stand up and out. Tilt the stand up and out.
    • Remove the four phillips screws that attach the stand to the computer.

    • Tilt the stand up and out.

  4. Starting from the optical drive, pry the back cover up with a plastic spudger. The cover is held in place by fragile plastic clips.  Careful to not break them. The cover is held in place by fragile plastic clips.  Careful to not break them.
    • Starting from the optical drive, pry the back cover up with a plastic spudger.

    • The cover is held in place by fragile plastic clips. Careful to not break them.

まとめ

To reassemble your device, follow these instructions in reverse order.

21 の人々がこのガイドを完成させました。

Tyler

メンバー登録日: 2012年06月19日

4,348 ポイント

16のガイドは作成済み

チーム

TechForce TechForce人のメンバー

Business

2 メンバー

18のガイドは作成済み

コメント1件

I took the back cover off because everytime i connected the power cable the blue light on the power cable would go out and in taking off the back cover i might find something obvious. I did not find anything obvious except for a plastic clip floating around by itself. this may be the cause to a short i am thinking. Any ideas?

kim - 返信

コメントを追加する

統計データを表示:

過去 24時間: 12

過去 7 日: 62

過去 30 日: 268

今までの合計 23,114