Disassembling Coby Kyros MID9742 Outer Casing - iFixit 修理ガイド

はじめに

This process is simple and when completed will allow the user to service the components that are located in the interior of the tablet.

必要な工具と部品

手順1 Outer Casing

Disassembling Coby Kyros MID9742 Outer Casing, Outer Casing: 手順 1、 1の画像 1

Use a spudger to remove the four rubber screw covers from the four back corners of the tablet.

手順2

Disassembling Coby Kyros MID9742 Outer Casing: 手順 2、 1の画像 1

Place the PH00 screwdriver and use it to remove the four 0.5 cm screws from each corner of the tablet.

手順3

Disassembling Coby Kyros MID9742 Outer Casing: 手順 3、 1の画像 1

Place a metal spudger tool in between the front and back panels of the tablet and begin to pry the base from the front panel by moving the metal tool around the perimeter of the tablet.
Note that clicking noises will be heard during this process, the panels are assembled well so it may take some force to separate the two panels.
Use caution while prying, do not stick the metal spudger in too far as it may damage internal components

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

1人の作成者と共同作成されました。

Ian Swett

メンバー登録日: 03/11/15

597 ポイント

5のガイドは作成済み

+9 個以上のバッジ

チーム

Colorado Springs, Team 5-3, Panko Spring 2015 Colorado Springs, Team 5-3, Panko Spring 2015人のメンバー

UCCS-PANKO-S15S5G3

3 メンバー

12のガイドは作成済み

0 件のコメント

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 2

今までの合計 467