メインコンテンツにスキップ

Canon Powershot SD880 LCD Display Replacement

必要な工具と部品

  1. Canon Powershot SD880 LCD Display Replacement, Back Cover: 手順 1、 3の画像 1 Canon Powershot SD880 LCD Display Replacement, Back Cover: 手順 1、 3の画像 2 Canon Powershot SD880 LCD Display Replacement, Back Cover: 手順 1、 3の画像 3
    • Remove the two 2.4 mm screws on the side of the camera that are next to the LCD screen using a Phillips #00 screwdriver.

    • Remove the two 4.1 mm screws on the other side using a Phillips #00 screwdriver.

    • One screw will be located under the rubber USB flap.

    • Remove the single 2.6 mm screw from the bottom of the camera using a Phillips #00 screwdriver.

    • Slowly pull the back cover off of the camera.

  2. Canon Powershot SD880 LCD Display Replacement, LCD Display: 手順 2、 3の画像 1 Canon Powershot SD880 LCD Display Replacement, LCD Display: 手順 2、 3の画像 2 Canon Powershot SD880 LCD Display Replacement, LCD Display: 手順 2、 3の画像 3
    • Remove the two 2.9 mm screws at the top-right corner and bottom-left corner of the LCD screen using a Phillips #0 screwdriver.

    • Disconnect the ribbons that connect the screen to the camera.

    • Lift the screen off.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

8人の作成者と共同で作成されました。

Ben Tupas

メンバー登録日: 01/13/11

317 ポイント

3のガイドは作成済み

チーム

Cal Poly, Team 13-3, Forte Winter 2011 Cal Poly, Team 13-3, Forte Winter 2011人のメンバー

CPSU-FORTE-W11S13G3

5 メンバー

8のガイドは作成済み

コメント 1 件

Hm. "Disconnect the ribbons" resulted in a torn ribbon, and so a dead camera, I think. This also doesn't say how to take the LCD screen out of its frame. Alas.

Maelduin - 返信

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 2,301