はじめに

Use this guide to remove the front and rear cover of the Canon PowerShot SD1100 IS.

パーツ

パーツは必要ありません。

  1. Remove wrist strap and battery. Remove wrist strap and battery.
    • Remove wrist strap and battery.

  2. Remove 2 screws from each side of the camera (4 total, 0.102 in). Remove 2 screws from the bottom on the camera (0.138 in). Do not mix the 4 side screws with the 2 bottoms ones; they are different sizes.
    • Remove 2 screws from each side of the camera (4 total, 0.102 in).

    • Remove 2 screws from the bottom on the camera (0.138 in).

    • Do not mix the 4 side screws with the 2 bottoms ones; they are different sizes.

  3. Free shipping on all orders over $100.00 or containing a Pro Tech Toolkit!

    当社のショップを閲覧する

    Ever fixed something? That’s Genius.

    Share your repair story with #ImAGenius

    We Are All Geniuses

    Share your repair story with #ImAGenius

  4. Gently pull off the front cover. The plate on the side should come off. Gently pull off the back cover.
    • Gently pull off the front cover.

    • The plate on the side should come off.

    • Gently pull off the back cover.

  5. The cases should now be removed.
    • The cases should now be removed.

まとめ

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

Tyler Grossheim

メンバー登録日: 2011年01月25日

1,359 ポイント

6のガイドは作成済み

チーム

Cal Poly, Team 3-32, Regan Winter 2011 Cal Poly, Team 3-32, Regan Winter 2011人のメンバー

CPSU-REGAN-W11S3G32

3 メンバー

8のガイドは作成済み

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 3

今までの合計 3,154