メインコンテンツにスキップ

はじめに

This guide will allow you to remove the outer casing of the Canon PowerShot S80.

パーツ

パーツは指定されていません。

  1. Remove the knot on the wrist lanyard. Remove the battery and memory card.
    • Remove the knot on the wrist lanyard.

    • Remove the battery and memory card.

  2. Remove all screws from sides of outer casing. Begin removing the screws on the bottom of the outer casing.
    • Remove all screws from sides of outer casing.

    • Begin removing the screws on the bottom of the outer casing.

    • Remove the rest of the screws from the outer casing.

  3. Gently pull the front cover off the camera. Gently pull the front cover off the camera. Gently pull the front cover off the camera.
    • Gently pull the front cover off the camera.

  4. Open the "A/V Out Digital" cover slide, and remove the screw inside. Gently pull off the back casing. Remove the black "L" shaped piece of metal.
    • Open the "A/V Out Digital" cover slide, and remove the screw inside.

    • Gently pull off the back casing.

    • Remove the black "L" shaped piece of metal.

終わりに

To reassemble your device, follow these instructions in reverse order.

6 の人々がこのガイドを完成させました。

BrettH

メンバー登録日: 2009年10月28日

219 ポイント

5のガイドは作成済み

チーム

Cal Poly, Team 19-5, Maness SU 2012 Cal Poly, Team 19-5, Maness SU 2012人のメンバー

CPSU-MANESS-SU12S19G5

1 メンバー

5のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 5

今までの合計 7,597