メインコンテンツにスキップ

Disassembling Canon EOS Rebel XS Top Panel

必要な工具と部品

  1. Disassembling Canon EOS Rebel XS Top Panel, Latch Side Cover: 手順 1、 1の画像 1
    • Remove the two 3mm (1/8") black screws from the side cover using a #00 Phillips screwdriver.

  2. Disassembling Canon EOS Rebel XS Top Panel: 手順 2、 1の画像 1
    • On the bottom, remove the 6mm (13/64") screw with the #00 Phillips Screwdriver.

    • Pry up the panel; starting from the front/bottom corner, as indicated.

    • There's a concealed lip, under the opposite edge.

  3. Disassembling Canon EOS Rebel XS Top Panel, Disassembling Canon EOS Rebel XS Front Cover: 手順 3、 1の画像 1
    • Remove three medium length screws from the bottom of the camera

  4. Disassembling Canon EOS Rebel XS Top Panel: 手順 4、 1の画像 1
    • Remove the two medium length screws on the front panel of the camera above the lens mount.

    • Once you done, you may use the Spudger to panel from non-grip side.

    • If you start on the grip side, it will be more challenging to loosen the panel.

  5. Disassembling Canon EOS Rebel XS Top Panel, Back Cover: 手順 5、 1の画像 1
    • Remove the three long black screws from the bottom using a #00 Phillips screwdriver.

    • Use tweezers to lift the panel.

  6. Disassembling Canon EOS Rebel XS Top Panel: 手順 6、 1の画像 1
    • Once you have detached the back cover, use a pair of tweezers to lightly pull on strap found connecting the back cover to the camera.

  7. Disassembling Canon EOS Rebel XS Top Panel, Top Panel: 手順 7、 1の画像 1
    • Remove the following ribbons with the tweezers by gently pulling on them.

    • Remove the three black screws, near the eye piece, using the Phillips Screwdriver.

  8. Disassembling Canon EOS Rebel XS Top Panel: 手順 8、 1の画像 1
    • Remove the cable heads attached on the front side of the camera next to the lens mount.

    • Be gentle when puling wires lose, use the tweezers to remove the wires.

  9. Disassembling Canon EOS Rebel XS Top Panel: 手順 9、 1の画像 1
    • You can use your fingers to pull the top panel of the camera.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

5人の作成者と共同で作成されました。

Daniel Bussone

メンバー登録日: 01/28/11

1,251 ポイント

11のガイドは作成済み

チーム

Cal Poly, Team 3-41, Regan Winter 2011 Cal Poly, Team 3-41, Regan Winter 2011人のメンバー

CPSU-REGAN-W11S3G41

2 メンバー

21のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 1

過去 7 日: 2

過去 30 日: 15

今までの合計 3,879