Disassembling Black and Decker BL3000S Blender Base - iFixit 修理ガイド

はじめに

As a first step to clean, maintain, or install new parts (excluding the blender blades) for the Black and Decker BL3000S the blender base must be taken apart. This guide will provide step by step instructions of how to perform this task.

必要な工具と部品

手順1 Blender Base

Disassembling Black and Decker BL3000S Blender Base, Blender Base: 手順 1、 2の画像 1

Disassembling Black and Decker BL3000S Blender Base, Blender Base: 手順 1、 2の画像 2

Before disassembling the blender base, make sure the blender disconnected from any power outlet.
Lift the jar straight up from the base without tilting the jar.

手順2

Disassembling Black and Decker BL3000S Blender Base: 手順 2、 1の画像 1

Remove the top three 1/4 inch base screws using a Philip's head screwdriver.

手順3

Disassembling Black and Decker BL3000S Blender Base: 手順 3、 2の画像 1

Disassembling Black and Decker BL3000S Blender Base: 手順 3、 2の画像 2

Remove the two base leg covers next to the power cord using pliers or a flat-head screwdriver.
This provides access to the base screws beneath.

手順4

Disassembling Black and Decker BL3000S Blender Base: 手順 4、 1の画像 1

Remove the following screws that secure the top and bottom halves of the base.
One 1/4 Phillips screw
One TA-20 screw
Both screwdrivers must have a minimum of a three inch shank (length).
Screwdrivers with extenders will not fit down the access holes.

手順5

Disassembling Black and Decker BL3000S Blender Base: 手順 5、 1の画像 1

Lift the top half of the base from the bottom half of the base to reveal the internal mechanism.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

3人の作成者と共同で作成されました。

Andrew

メンバー登録日: 10/04/12

209 ポイント

4のガイドは作成済み

+7 個以上のバッジ

チーム

Cal Poly, Team 6-34, Regan Fall 2012 Cal Poly, Team 6-34, Regan Fall 2012人のメンバー

CPSU-REGAN-F12S6G34

4 メンバー

6のガイドは作成済み

0 件のコメント

統計データ:

過去 24時間: 0

過去 7 日: 14

過去 30 日: 57

今までの合計 7,669