はじめに

How to open it for repairs or battery swap

The lamp opens up at the base: there are two smaller tabs next to the button, the semi-transparent plasic can be pressed in a bit with a knife, put a bit of paper inbetween to prevent the clip from snapping back. Next go with a knife towards one of the large tabs on the side until one side snaps out. Repeat for other side.
  • The lamp opens up at the base: there are two smaller tabs next to the button, the semi-transparent plasic can be pressed in a bit with a knife, put a bit of paper inbetween to prevent the clip from snapping back. Next go with a knife towards one of the large tabs on the side until one side snaps out. Repeat for other side.

コメントを追加する

Remove the 4 screws (warning: 2x2 different types), out comes the pcb. Detach battery connector at the back.
  • Remove the 4 screws (warning: 2x2 different types), out comes the pcb. Detach battery connector at the back.

コメントを追加する

  • remove two more screws to get at the battery

コメントを追加する

  • Overview of parts

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

4 の人々がこのガイドを完成させました。

petur

メンバー登録日: 2011年07月23日

178 ポイント

2のガイドは作成済み

I think it is easier to open the lamp by pressing the semi-transparent part at the opposite side of the button.

Matthieu Morel - 返信

How can I open the lamp??? Please post a photo of how are u using the knife because I can't!!!

Alberto Santaella Gallego - 返信

you need to press the clips inward, the picture shows where the clips are. Slide inbetween and press

petur - 返信

コメントを追加する

統計データを表示:

過去 24時間: 1

過去 7 日: 6

過去 30 日: 24

今までの合計 1,857