メインコンテンツにスキップ

Disassembling Arnova 7K G3 Motherboard

必要な工具と部品

  1. Disassembling Arnova 7K G3 Motherboard, Rear Cover: 手順 1、 3の画像 1 Disassembling Arnova 7K G3 Motherboard, Rear Cover: 手順 1、 3の画像 2 Disassembling Arnova 7K G3 Motherboard, Rear Cover: 手順 1、 3の画像 3
    • Remove four 5 mm Phillips #00 screws from each corner of the tablet.

  2. Disassembling Arnova 7K G3 Motherboard: 手順 2、 2の画像 1 Disassembling Arnova 7K G3 Motherboard: 手順 2、 2の画像 2
    • Place the iFixit opening tool in the notches between the cases and pull the covers apart.

  3. Disassembling Arnova 7K G3 Motherboard: 手順 3、 1の画像 1
    • Repeat step two until 3/4 of the rear cover is unlatched.

    • Proceed to remove the rear cover by gently pulling it apart by hand.

  4. Disassembling Arnova 7K G3 Motherboard, Disassembling Arnova 7K G3 Logic Board Ribbon Connectors: 手順 4、 2の画像 1 Disassembling Arnova 7K G3 Motherboard, Disassembling Arnova 7K G3 Logic Board Ribbon Connectors: 手順 4、 2の画像 2
    • Peel the copper tape covering the ribbon connector with a set of tweezers.

  5. Disassembling Arnova 7K G3 Motherboard: 手順 5、 3の画像 1 Disassembling Arnova 7K G3 Motherboard: 手順 5、 3の画像 2 Disassembling Arnova 7K G3 Motherboard: 手順 5、 3の画像 3
    • Locate the two gray pins on the ribbon connector.

    • Grab the first pin with tweezers and gently pull it towards the ribbon. Repeat the step.

    • Gently pull the ribbon cable out of the connection port.

  6. Disassembling Arnova 7K G3 Motherboard: 手順 6、 3の画像 1 Disassembling Arnova 7K G3 Motherboard: 手順 6、 3の画像 2 Disassembling Arnova 7K G3 Motherboard: 手順 6、 3の画像 3
    • Locate the ribbon connector two.

    • Locate the pins of ribbon connector two. Repeat step two for unlocking the pins.

    • Gently pull the ribbon out of the connection port.

  7. Disassembling Arnova 7K G3 Motherboard, Disassembling Arnova 7K G3 Motherboard: 手順 7、 1の画像 1
    • Remove the two Phillips #00 screws from the motherboard.

  8. Disassembling Arnova 7K G3 Motherboard: 手順 8、 1の画像 1
    • Gently lift up the motherboard and reorient it in a more efficient manner in order to locate the desired components.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

4人の作成者と共同で作成されました。

Kue

メンバー登録日: 03/18/15

301 ポイント

3のガイドは作成済み

チーム

Michigan Tech, Team 1-2, Lauer Spring 2015 Michigan Tech, Team 1-2, Lauer Spring 2015人のメンバー

MTU-LAUER-S15S1G2

2 メンバー

10のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 2

今までの合計 402