メインコンテンツにスキップ

Dexter Corded Jigsaw 750W Charcoal Replacement

必要な工具と部品

  1. Dexter Corded Jigsaw 750W Charcoal Replacement, Débranchez: 手順 1、 1の画像 1
    • Before you start, remember to disconnect the power plug.

  2. Dexter Corded Jigsaw 750W Charcoal Replacement: 手順 2、 1の画像 1
    • Remove the vacuum adapter from the back of the unit.

  3. Dexter Corded Jigsaw 750W Charcoal Replacement: 手順 3、 2の画像 1 Dexter Corded Jigsaw 750W Charcoal Replacement: 手順 3、 2の画像 2
    • Using a screwdriver unscrew and open the unit.

    • Unlock the tray by lifting the lever.

    • Lever the coal out of its housing.

    • Press lightly on the paw with a point to make it come out.

    • Remove the coal by pressing on it.

    • Lift the small tab from the inside by pressing on it, it should stick out slightly.

  4. Dexter Corded Jigsaw 750W Charcoal Replacement: 手順 7、 3の画像 1 Dexter Corded Jigsaw 750W Charcoal Replacement: 手順 7、 3の画像 2 Dexter Corded Jigsaw 750W Charcoal Replacement: 手順 7、 3の画像 3
    • Put the new coal in the coal holder.

    • Pull on the charcoal to make it stick out.

    • Clip the tip into the charcoal holder and check that it fits properly.

    • Check the mechanism, so that everything slides perfectly.

  5. Dexter Corded Jigsaw 750W Charcoal Replacement: 手順 10、 2の画像 1 Dexter Corded Jigsaw 750W Charcoal Replacement: 手順 10、 2の画像 2
    • Compress the carbon holder and put it back in its housing.

    • The coal holder must be in the right direction, the small line is at the end.

  6. Dexter Corded Jigsaw 750W Charcoal Replacement: 手順 11、 1の画像 1
    • Close and screw the unit back on.

ゴール

ある他の人がこのガイドを完成しました。

以下の翻訳者の皆さんにお礼を申し上げます:

fr en

100%

これらの翻訳者の方々は世界を修理する私たちのサポートをしてくれています。 あなたも貢献してみませんか?
翻訳を始める ›

作成者

1人の作成者と共同作成されました。

Céline Chemineau

メンバー登録日: 01/29/20

16,608 ポイント

95のガイドは作成済み

チーム

Leroy Merlin Leroy Merlin人のメンバー

Community

37 メンバー

239のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 14

今までの合計 668