Skip to main content

ガイド紹介

solid-state drive Replacement

パーツ

パーツは指定されていません。

  1. Disconnect the battery cable from the system board.
    • Disconnect the battery cable from the system board.

    • Remove the two screws (M1.6x4) that secure the battery to the palm-rest assembly.

    • Remove the six screws (M2x3) that secure the battery to the palm-rest assembly.

  2. Android 修理キット

    交換用スクリーンやバッテリーの修理キット

    ショップを見る

    Android 修理キット

    交換用スクリーンやバッテリーの修理キット

    ショップを見る
  3. Lift the battery off the palm-rest assembly.
    • Lift the battery off the palm-rest assembly.

    • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

  4. Peel off the display cable tape from the hard-drive plate.
    • Peel off the display cable tape from the hard-drive plate.

    • Remove the two screws (M1.6x2.5) that secure the hard-drive plate to the system board.

    • Remove the hard-drive plate.

    • Slide and remove the solid-state drive from the solid-state drive slot.

    • CAUTION: Solid-state drives are fragile. Exercise care when handling the solid-state drive.

    • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

ゴール

Johnathan Hammond

メンバー登録日: 2018年02月28日

36,257 Reputation

408のガイドは作成済み

チーム

Informative Technologies Inc. Informative Technologies Inc.人のメンバー

Community

18 メンバー

1,669のガイドは作成済み

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 25

Past 30 Days: 97

All Time: 1,153